Gear Shift Shaft and Fork Inspection
Precautions: Precautions for Diagnosing Trouble · Precautions for Disassembly and Reassembly · Precautions for Transmission / Transaxle · General safety (00)
1)Using feeler gauge, check clearance between fork (1) and sleeve (2) and replace those parts if it exceeds specified value.
Clearance “a” between fork and sleeve
Service limit (reference value): 0.40 mm (0.0157 in.)
2)Insert each gear shift shaft into gear shift fork and check that it moves smoothly. If not, correct burns or dents with oilstone, reamer or the like.