DTC B1001-00
Precautions: Precautions for Air Bag System Service · Precautions for Handling and Storage of Air Bag System Components · Precautions for Disposal of Air Bag and Seat Belt Pretensioner · Precautions for Restraint · General safety (00)
DTC Detecting Condition and Trouble Area
| DTC detecting condition | Trouble area |
|---|---|
|
B1001-00: SDM Wrong Assembly SDM has inconsistent ID code. |
SDM |
DTC Troubleshooting
| Step | Action | Yes | No |
|---|---|---|---|
| 1 |
Was “Air Bag Diagnostic System Check” performed?
|
Go to Step 2.
|
|
| 2 |
Air bag system type check
1)Identify SDM’s channel number of air bag, judging from SDM part number.
2)Identify vehicle’s channel number of air bag, judging from modules or pretensioners installed in vehicle.
Is SDM applicable to vehicle specification?
|
Replace SDM and recheck DTC.
|
Change SDM with the one compatible with vehicle air bag specification.
|
NOTE:
Upon completion of inspection and repair work, perform the following items.
•Reconnect all air bag system components and check that all components are properly mounted.
•Clear DTCs referring to DTC Clearance, if any DTC is detected.
•Repeat Air Bag Diagnostic System Check to check that the trouble has been solved.
•Clear DTCs referring to DTC Clearance, if any DTC is detected.
•Repeat Air Bag Diagnostic System Check to check that the trouble has been solved.