Enabling Air Bag System
Precautions: Precautions for Air Bag System Service · Precautions for Handling and Storage of Air Bag System Components · Precautions for Disposal of Air Bag and Seat Belt Pretensioner · Precautions for Restraint · General safety (00)
1)Check that removed components are installed and/or disconnected connectors are connected properly.
2)Check that ignition is “OFF”.
3)Connect negative (–) cable at battery and/or install “A/B” fuse to J/B. 
4)Set ignition “ON”.
5)Check if “AIR BAG” warning light flashes for about 6 seconds and then comes off.
6)Perform Air Bag System Construction if defective.