Precautions for Replacing Keyless Entry Control Module (Ignition Switch Model)
Precautions: Precautions for Diagnosing Trouble · Precautions for Replacing Ignition Key (Ignition Switch Model) · Precautions for Transmitter Disposal (Ignition Switch Model) · Precautions for Body, Cab and Accessories · General safety (00)
•When replacing the keyless entry control module, replace it with new one.
•After keyless entry control module is replaced with new one, perform “Immobilizer Key Registration” using SUZUKI scan tool.
•When keyless entry control module and ECM are replaced at the same time, refer to ECM Registration:Ignition Switch Model for their registration.
•All of ignition keys must be ready for the registration.
•After keyless entry control module is replaced with new one, perform “Immobilizer Key Registration” using SUZUKI scan tool.
•When keyless entry control module and ECM are replaced at the same time, refer to ECM Registration:Ignition Switch Model for their registration.
•All of ignition keys must be ready for the registration.