DTC P1610
Precautions: Precautions for Diagnosing Trouble · Precautions for Immobilizer System · General safety (00)
DTC Detecting Condition and Trouble Area
| DTC detecting condition | Trouble area |
|---|---|
|
P1610: Immobilizer ID and/or Password Not Registered Immobilizer ID code is not registered. |
•ECM ID code is not registered in keyless entry control module
•ECM •CAN communication circuit / connector •Control module connected with CAN communication line |
DTC Troubleshooting
| Step | Action | Yes | No |
|---|---|---|---|
| 1 |
ECM registration
1)Perform ECM Registration:Ignition Switch Model.
2)Recheck DTC.
Is DTC P1610 still detected?
|
Go to Step 2.
|
End. (ECM was not registered)
|
| 2 |
DTC check
1)Check DTC in keyless entry control module.
Is DTC B1173, B1175 or B1176 detected?
|
Go to troubleshooting for applicable DTC.
|
Go to Step 3.
|
| 3 |
DTC check
1)Check DTC related to CAN communication.
Is there any CAN-DTC(s) detected?
|
Go to troubleshooting for applicable DTC.
|
Replace ECM and recheck DTC.
•M16A model:
•D16AA model: |