ECM Registration

Precautions: Precautions for Diagnosing Trouble · General safety (00)

After ECM is replaced with new one, register keyless start control module information to the ECM using SUZUKI scan tool and security device.

•Perform “ECM Registration” in “Immobilizer” menu on SUZUKI scan tool.
Refer to Operator’s Manual of SUZUKI scan tool for further details.

NOTE:

•When ECM is replaced with new one, refer to “Procedure after ECM Replacement” or “Registration for ECM Replacement”.

—M16A model:

—K14C model:

—D16AA model:

•When ECM and keyless start control module are replaced with new ones at the same time, perform “Immobilizer Key Registration” instead of “ECM Registration” using SUZUKI scan tool and security device. Refer to Operator’s Manual of SUZUKI scan tool for the immobilizer registration.