FUEL PRESSURE REGULATOR > REMOVAL |
| 1. DISCHARGE FUEL SYSTEM PRESSURE |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE V-BANK COVER |
![]() |
Remove the 2 nuts, then remove the V-bank cover.
| 4. DISCONNECT NO. 2 VENTILATION HOSE |
![]() |
Disconnect the No. 2 ventilation hose.
| 5. REMOVE AIR CLEANER ASSEMBLY |
![]() |
Disconnect the ventilation hose No. 2.
![]() |
Disconnect the vacuum hose.
Disconnect the mass air flow meter connector.
Remove the 2 wire harness clamps.
![]() |
Loosen the 2 hose clamps.
Remove the 2 bolts, then remove the air cleaner.
| 6. DISCONNECT NO. 2 FUEL PIPE SUB-ASSEMBLY |
![]() |
Remove the fuel pipe clamp.
Pinch the tube connector, and then pull the fuel pipe out of the pipe as shown in the illustration.
| 7. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY |
![]() |
Remove the 2 bolts, then remove the fuel pressure regulator.
Remove the vacuum hose.