Home › DRIVE LINE ยท VF4BM TRANSFER › EXTENSION HOUSING OIL SEAL

EXTENSION HOUSING OIL SEAL > REMOVAL

for Preparation Click here



1. DRAIN TRANSFER OIL


2. REMOVE TRANSFER CASE LOWER PROTECTOR


    F043499
  1. Remove the 4 bolts and transfer case lower protector.



3. REMOVE AUTOMATIC TRANSMISSION WITH TRANSFER

HINT:
(Click here)



4. REMOVE OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY


    F043429E01
  1. Using a chisel and hammer, loosen the staked part of the output shaft companion flange lock nut.

  1. Using SST to hold the output shaft companion flange, remove the output shaft companion flange lock nut.

    SST
    09330-00021  



    F043430E01
  1. Using SST, remove the output shaft companion flange sub-assembly.

    SST
    09950-40011   (09951-04020, 09952-04010, 09953-04030, 09954-04010, 09955-04051, 09957-04010, 09958-04011)



5. REMOVE TRANSFER EXTENSION HOUSING TYPE T OIL SEAL


    F043484E02
  1. Using SST, remove the oil seal.

    SST
    09308-00010  

    NOTICE:
    Do not damage the oil-seal-fitted surface of the extension housing sub-assembly rear.