Home › BRAKE › BRAKE CONTROL › VEHICLE STABILITY CONTROL SYSTEM

DTC    C1201/51    Engine Control System Malfunction

for Preparation Click here


DESCRIPTION

If trouble occurs in the engine control system, the ECM transmits the abnormality to the skid control ECU. The skid control ECU sets this DTC and prohibits TRAC and VSC control.

DTC No.
DTC Detection Condition
Trouble Area
C1201/51
Malfunction signal is received from ECM.
Engine control system

INSPECTION PROCEDURE

1.CHECK DTC (FOR ENGINE CONTROL SYSTEM)
  1. Check if the engine control system DTC is output (Click here for 1GR-FE, or Click here for 2UZ-FE).

    Result:

    Condition
    Proceed to
    DTC is not output
    A
    DTC is output
    B



B
INSPECT ENGINE CONTROL SYSTEM
A

REPLACE ECM