AIR CONDITIONING SYSTEM > DTC CHECK / CLEAR |
| DTC CHECK (SENSOR CHECK) |
Start the engine and warm it up.
Perform the indicator check (Click here).
Push the "R/F" switch to perform the actuator check.
![]() |
SR-5 grade:
![]() |
Limited grade:
![]() |
If the steps are difficult to read because they change automatically, push the "FRONT DEF" switch to display the steps one at a time so that they can be read easily. The items are displayed step by step each time the "FRONT DEF" switch is pushed.
![]() |
Read the code displayed on the panel. (Trouble codes are output on the temperature display.)
| CLEARING DTC |
There are two ways to cancel a DTC.
![]() |
During the sensor check, press the "FRONT DEF" switch and "REAR DEF" switch at the same time.
![]() |
Pull the ECU-B fuse in the engine room J/B for 20 seconds or longer to clear the DTC memory.