Home › BRAKE › BRAKE CONTROL › REAR SPEED SENSOR

REAR SPEED SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL SPEED SENSOR REAR LH


    F043113
  1. Install the rear speed sensor with the nut to the steering knuckle.

    Torque:
    8.3 N*m{ 85 kgf*cm , 73 in.*lbf }

    NOTICE:
    Make sure the sensor tip is clean.



    F043111
  1. Connect the speed sensor connector.



2. INSTALL REAR WHEEL

Torque:
110 N*m{ 1.122 kgf*cm , 81 ft.*lbf }



3. CHECK VSC SENSOR SIGNAL

HINT:
(Click here)