Home › BODY › EXTERIOR › ROOF DRIP SIDE FINISH MOULDING

ROOF DRIP SIDE FINISH MOULDING > REMOVAL

for Preparation Click here


HINT:
On the RH side, use the same procedures as on the LH side.



1. REMOVE ROOF RACK ASSEMBLY LH (w/ Roof Rack)

HINT:
(Click here)



2. REMOVE ROOF DRIP SIDE MOULDING COVER FRONT LH (w/o Roof Rack)


    B062586E01
  1. Using a screwdriver, disengage the 2 claws and remove the moulding cover.

    HINT:
    Tape the screwdriver tip before use.



3. REMOVE WINDSHIELD MOULDING OUTSIDE LH


    B062955E01
  1. Put protective tape around the windshield moulding.

  1. Pull out the windshield moulding by hand.

    NOTICE:
    1. Be careful not to damage the windshield moulding.
    2. If the windshield moulding is damaged, exchange it for a new one.



4. REMOVE WINDSHIELD OUTSIDE MOULDING FASTENER NO. 1


    B062959E01
  1. Put protective tape around the fastener.

  1. Using a screwdriver, disengage the 3 clips and pull out the fastener by hand.

    HINT:
    Tape the screwdriver tip before use.

    NOTICE:
    1. Be careful not to damage the windshield and fastener.
    2. If the windshield and fastener are damaged, exchange them for a new one.



5. REMOVE ROOF DRIP SIDE FINISH MOULDING CENTER NO. 2 LH


    B062957E01
  1. Put protective tape around the moulding.

  1. Pull out the moulding by hand.

    NOTICE:
    Be careful not to damage the moulding.



6. REMOVE ROOF DRIP SIDE MOULDING END COVER REAR LH (w/o Roof Rack)


    B062586E02
  1. Using a screwdriver, disengage the 2 claws and remove the moulding end cover.

    HINT:
    Tape the screwdriver tip before use.



7. REMOVE ROOF DRIP SIDE FINISH MOULDING REAR LH


    B062958E01
  1. Put protective tape around the moulding.

  1. Pull out the moulding by hand.

    NOTICE:
    1. Be careful not to damage the moulding.
    2. Do not remove the clips.
    3. In case that the clips are damaged or removed accidentally, exchange them into supplied ones.



8. REMOVE ROOF RACK BRACKET FRONT LH (w/o Roof Rack)


    B062588
  1. Remove the 2 bolts and bracket.



9. REMOVE ROOF RACK BRACKET NO. 1 REAR LH (w/o Roof Rack)
  1. Remove the 2 bolts and bracket.