Home › SUSPENSION & AXLE › SUSPENSION › FRONT SUSPENSION LOWER NO. 1 ARM

FRONT SUSPENSION LOWER NO. 1 ARM > INSTALLATION

for Preparation Click here



1. INSTALL FRONT LOWER ARM BUSH NO. 2 LH


    G020166E01
  1. Using SST and a press, install a new lower arm bush No. 2 LH.

    SST
    09710-26010   (09710-05081)
    09950-60020   (09951-00890)

    NOTICE:
    Press the lower arm bush No. 2 in the lower arm at the bush positioning protrusions become perpendicular to the lower arm as shown in the illustration.



2. INSTALL FRONT LOWER ARM BUSH NO. 1 LH


    G020165E01
  1. Using SST and a press, install a new lower arm bush No. 1 LH.

    SST
    09223-00010  
    09612-30012  

    NOTICE:
    Press the lower arm bush No. 1 in the lower arm at the bush positioning protrusions become parallel with the lower arm as shown in the illustration.



3. TEMPORARILY TIGHTEN FRONT SUSPENSION ARM SUB-ASSEMBLY NO. 1 LH


    G020160E03
  1. Align the matchmarks on the camber adjust cam No. 2 and toe adjust cam sub-assembly, temporarily tighten the bolt and the nut.

  1. Install the front lower ball joint attachment LH, a new nut and a new cotter pin.

    Torque:
    140 N*m{ 1,430 kgf*cm , 103 ft.*lbf }



    G020159
  1. Install the front lower ball joint attachment LH with the 2 bolts.

    Torque:
    60 N*m{ 1,630 kgf*cm , 118 ft.*lbf }



4. TEMPORARILY TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING


    C099159
  1. Install the front shock absorber with coil spring, the bolt and the washer, and temporarily tighten the nut.



5. INSTALL FRONT DISC WHEEL

Torque:
112 N*m{ 1,140 kgf*cm , 83 ft.*lbf }



6. STABILIZE SUSPENSION
  1. Jack down the vehicle.

  1. Bounce the vehicle up and down several times to stabilize the suspension.



7. FULLY TIGHTEN FRONT SUSPENSION ARM SUB-ASSEMBLY NO. 1 LH


    G020160
  1. Fully tighten the bolt and the nut.

    Torque:
    135 N*m{ 1,380 kgf*cm , 100 ft.*lbf }



8. FULLY TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING


    C099159
  1. Fully tighten the nut.

    Torque:
    135 N*m{ 1,380 kgf*cm , 100 ft.*lbf }



9. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

HINT:
(Click here)