Home › BODY › SEAT › FRONT SEAT ASSEMBLY (for Power Seat Type LH Side)

FRONT SEAT ASSEMBLY (for Power Seat Type LH Side) > REASSEMBLY

for Preparation Click here



1. INSTALL OCCUPANT DETECTION ECU

HINT:
Click here



2. INSTALL SEAT WIRE NO. 2


3. INSTALL FRONT SEAT CUSHION PROTECTOR


4. INSTALL SEAT POSITION AIR BAG SENSOR

HINT:
Click here



5. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY LH


6. INSTALL VERTICAL ADJUSTER BRACKET COVER INNER


7. INSTALL VERTICAL ADJUSTER BRACKET COVER OUTER


8. INSTALL RECLINING ADJUSTER INSIDE COVER RH


9. INSTALL RECLINING ADJUSTER INSIDE COVER LH


10. REMOVE FRONT SEATBACK HEATER ASSEMBLY LH


11. INSTALL SEPARATE TYPE FRONT SEATBACK COVER
  1. Install the seatback pad.

  1. Cover the top of the seatback pad with the front seatback cover.



    B050126E13
  1. Using hog ring pliers, install the front seatback cover completely with new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to prevent wrinkles as much as possible.



12. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
  1. Install the seatback cover together with the pad with new hog rings.



    B065179
  1. with Side airbag:

    1. Install the front seatback cover bracket with the nut.

      Torque:
      5.5 N*m{ 56 kgf*cm , 48 in.*lbf }



    B065611E01
  1. with Side airbag:

    1. Install the wire harness and clamp of the side airbag through the seat cushion cover end.

      NOTICE:
      Be careful not to damage the cover.

  1. Using hog ring pliers, install new hog rings.



13. INSTALL FRONT SEAT HEADREST SUPPORT


14. REMOVE FRONT SEATBACK BOARD COVER SUB-ASSEMBLY


15. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY


16. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH


17. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER


18. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
  1. Install the seat cushion pad to the seat cushion cover.



    B050126E13
  1. Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to prevent wrinkles as much as possible.



19. REMOVE FRONT POWER SEAT SWITCH LH


20. INSTALL FRONT SEAT CUSHION SHIELD INNER LH


21. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

HINT:
Click here



22. INSTALL POWER SEAT SWITCH ASSEMBLY


23. INSTALL FRONT SEAT CUSHION SHIELD INNER NO.1 LH


24. INSTALL SLIDE & VERTICAL POWER SEAT SWITCH KNOB


25. INSTALL RECLINING POWER SEAT SWITCH KNOB


26. INSTALL FRONT SEAT HEADREST ASSEMBLY