FUEL TANK > REMOVAL |
| 1. DISCHARGE FUEL SYSTEM PRESSURE |
| 2. REMOVE REAR FLOOR SERVICE HOLE COVER |
![]() |
Remove the rear floor carpet assembly.
Remove the 3 screws and rear floor service hole cover.
Disconnect the connector.
| 3. DISCONNECT FUEL TANK TO FILLER PIPE HOSE |
![]() |
Disconnect the fuel tank to filler pipe hose from the fuel filler pipe.
| 4. DRAIN FUEL |
| 5. REMOVE NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY |
Set a transmission jack to the fuel tank protector.
Remove the 6 bolts and the fuel tank protector.
| 6. DISCONNECT FUEL TANK MAIN TUBE AND FUEL TANK RETURN TUBE |
![]() |
Pinch and turn the projections of the retainers in the direction shown by the arrow to release the lock. Pull out the 2 fuel tank tubes.
| 7. DISCONNECT FUEL TANK BREATHER TUBE SUB-ASSEMBLY |
![]() |
Pinch and turn the projection of the retainer in the direction shown by the arrow to release the lock. Pull out the fuel tank breather tube.
| 8. DISCONNECT FUEL TANK VENT HOSE |
![]() |
Disconnect the fuel tank breather tube from the fuel tank.
Push the connector deep inside.
Pinch portion A.
Pull out the connector.
| 9. REMOVE FUEL TANK ASSEMBLY |
Set a transmission jack to the fuel tank.
Remove the 2 bolts, 2 fuel tank bands and fuel tank.
| 10. REMOVE FUEL TANK CUSHION |
| 11. REMOVE FUEL TANK MAIN TUBE AND FUEL TANK RETURN TUBE |
![]() |
Remove the 2 clips, and pull out the 2 fuel tank tubes.
| 12. REMOVE FUEL SUCTION WITH PUMP & GAGE TUBE ASSEMBLY |
![]() |
Using SST, loosen the retainer.
Remove the retainer.
Remove the fuel suction with pump & gage tube assembly.
Remove the gasket from the fuel tank.
| 13. REMOVE FUEL TANK BREATHER TUBE SUB-ASSEMBLY |
![]() |
Pinch and turn the projection of the retainer in the direction shown by the arrow to release the lock. Pull out the fuel tank breather tube.
| 14. REMOVE FUEL TANK TO FILLER PIPE HOSE |
Remove the fuel tank to filler pipe hose from the fuel tank.