Home › BODY › ENGINE HOOD / DOOR › HOOD

HOOD > REASSEMBLY

for Preparation Click here



1. INSTALL HOOD LOCK ASSEMBLY


    B063509
  1. with Security system:
    Connect the connector.

  1. Install the hood lock assembly with the 3 bolts.

  1. Adjust the hood lock position so that the striker will come in, by moving the striker (Click here).

  1. Tighten the hood lock bolts after the adjustment.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }



2. INSTALL HOOD HINGE ASSEMBLY LH
  1. Install the hood hinge with the 2 bolts.

    Torque:
    13.0 N*m{ 130 kgf*cm , 10 ft.*lbf }



3. INSTALL HOOD HINGE ASSEMBLY RH
  1. Install the hood hinge with the 2 bolts.

    Torque:
    13.0 N*m{ 130 kgf*cm , 10 ft.*lbf }



4. INSTALL HOOD SUB-ASSEMBLY
  1. Install the hood with the 4 bolts.

    Torque:
    13.0 N*m{ 130 kgf*cm , 10 ft.*lbf }



5. INSTALL HOOD SUPPORT ASSEMBLY LH
  1. Install the hood support with the 2 bolts.

    Torque:
    17.5 N*m{ 180 kgf*cm , 13 ft.*lbf }



6. INSTALL HOOD SUPPORT ASSEMBLY RH
  1. Install the hood support with the 2 bolts.

    Torque:
    17.5 N*m{ 180 kgf*cm , 13 ft.*lbf }



7. INSTALL HOOD BULGE (for Sport Package)


    B062407
  1. Install the hood bulge plate and hood air intake guide to the hood bulge.



    B127202
  1. Using a hand riveter or air riveter with nose piece, strike rivets into the hood bulge assembly.

    NOTICE:
    1. If the rivet is not positioned perpendicularly, it will bend the mandrel.
    2. Do not prize a riveter, because the riveter will be damaged and the mandrel will be bent.
    3. Do not tilt the riveter when removing the rivet, because the materials are not tightened firmly.
    4. Install the rivet while attaching the materials, because they are not tightened firmly.



    B062402E01
  1. Install the hood air intake guide No. 1 retainer with the screw and hood bulge assembly.

  1. Install the hood bulge assembly to the hood with the 5 nuts.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }



8. INSTALL RADIATOR GRILLE
  1. Install the radiator grille with the 12 nuts.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }

  1. Install the hood auxiliary catch hook with the bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Install the auxiliary catch release lever with the 2 bolts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }