Home › Vehicle Exterior › BODY WELD POINT › RADIATOR SUPPORT
BM1440E _01 Vehicle Exterior _056782 BODY WELD POINT _0276936 RADIATOR SUPPORT F

BODY WELD POINT  RADIATOR SUPPORT  ASSEMBLY REPLACEMENT  


K122665

REMOVAL / INSTALLATION


Symbol Meaning
K108818

Remove Weld Points
K108823

Plug Weld

INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

After welding, apply body sealer to the corresponding parts. (See the painting / coating)

4.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

5.

Measure the dimensions before installing the headlights.


K122699C01
0.427,0.302 0.74,0.458 0.313,0.156 10 false *A
*A LH Side - -


K122700C01
0.594,0.281 0.906,0.438 0.313,0.156 10 false *A
*A RH Side - -


K122701N01
2.938,4.677 3.094,4.875 0.156,0.198 10 true A 3.021,5 3.177,5.198 0.156,0.198 10 true B 3.99,4.5 4.146,4.698 0.156,0.198 10 true C 4.271,4.177 4.427,4.375 0.156,0.198 10 true D

Reference Value:
Area Measurement Area Measurement
A 1460 mm (57.48 in.) B 1045 mm (41.14 in.)
C 961 mm (37.83 in.) D 1002 mm (39.45 in.)