Home › Vehicle Exterior › BODY WELD POINT › FRONT FENDER APRON
BM1440E _01 Vehicle Exterior _056782 BODY WELD POINT _0276937 FRONT FENDER APRON F

BODY WELD POINT  FRONT FENDER APRON  ASSEMBLY REPLACEMENT  


K122666

With the radiator support and cowl top side panel removed.


REMOVAL / INSTALLATION


Symbol Meaning
K108818

Remove Weld Points
K108820

Remove Weld Points
K108823

Plug Weld
K108825

Plug Weld
K108834

Body Sealer

INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

*a is only for installation.

4.

Before installing a new part, apply body sealer.

HINT:

Apply body sealer in an even, continuous bead.


5.

After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

6.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K122702N01
3.125,6.24 3.438,6.438 0.313,0.198 10 false *a 3.406,6.781 3.719,6.979 0.313,0.198 10 false *a 3.333,7.75 3.646,7.948 0.313,0.198 10 false *a 3.135,4.083 3.448,4.281 0.313,0.198 10 false *a 3.604,3.333 3.917,3.531 0.313,0.198 10 false *a 5.188,3.385 5.5,3.583 0.313,0.198 10 false *a 6.24,3.969 6.552,4.167 0.313,0.198 10 false *a