Home › Vehicle Exterior › BODY WELD POINT › BACK DOOR OPENING SIDE REINFORCEMENT
BM1440E _01 Vehicle Exterior _056782 BODY WELD POINT _0276949 BACK DOOR OPENING SIDE REINFORCEMENT F

BODY WELD POINT  BACK DOOR OPENING SIDE REINFORCEMENT  CUT AND JOIN REPLACEMENT SECTIONS  


K122678

With the back door opening trough and rear floor crossmember upper gusset removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108819

Remove Weld Points
K108820

Remove Weld Points

K122741


INSTALLATION


Symbol Meaning
K108818

Remove Weld Points
K108819

Remove Weld Points
K108820

Remove Weld Points
K108823

Plug Weld
K108824

Plug Weld
K108825

Plug Weld

INSTALLATION POINT
1.

If the entire supply part is not needed, remove the part of the supply part that is needed.

2.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

3.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K122742

K122743