Home › Vehicle Exterior › BODY WELD POINT › CAB MOUNTING NO.1 BRACKET
BM1440E _01 Vehicle Exterior _056782 BODY WELD POINT _0276961 CAB MOUNTING NO.1 BRACKET F

BODY WELD POINT  CAB MOUNTING NO.1 BRACKET  ASSEMBLY REPLACEMENT  


K122692

With the frame side rail plate removed.


REMOVAL


Symbol Meaning
K108826

Cut with Disc Sander etc.

K122773


INSTALLATION


Symbol Meaning
K108830

Fillet Weld

INSTALLATION POINT
1.

Make sure that proper welding can be performed by setting up the welding conditions as necessary before performing work.

2.

Before installing the cab mounting No. 1 brackets, set the cab (upper body) on the vehicle frame and confirm the cab mounting No. 1 brackets' installation positions.

3.

To prevent heat deformation, weld the right and left side of each part before continuing to the next part.

4.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K122774C01
4.667,0.875 5.448,1.083 0.781,0.208 10 false 25 (0.98) 4.667,3.854 5.448,4.063 0.781,0.208 10 false 25 (0.98) 6.26,6.135 7.042,6.344 0.781,0.208 10 false 30 (1.18) 6.083,7.052 6.865,7.26 0.781,0.208 10 false 25 (0.98) 0.438,6.083 1.063,6.302 0.625,0.219 10 false 30 (1.18) 0.594,7.031 1.188,7.26 0.594,0.229 10 false 25 (0.98) 6.646,8.5 6.958,8.698 0.313,0.198 10 false *a
*a mm (in.) - -