Home › Vehicle Exterior › BODY WELD POINT › NAME PLATE
BM1440E _01 Vehicle Exterior _056782 BODY WELD POINT _0276968 NAME PLATE F

BODY WELD POINT  NAME PLATE  ATTACHMENT POSITION  


1.

Heat the double-sided tape remaining on the body with an infrared lamp or equivalent.

HINT:

Heat the tape to 40 to 60°C for approximately 1 to 2 minutes.


2.

Wipe off the remaining double-sided tape using a clean cloth or equivalent.

NOTICE:

If a name plate is installed without thoroughly removing the remaining double-sided tape from the body, the name plate will not adhere properly. Make sure to thoroughly wipe off the double-sided tape.


3.

After cleaning the installation area of the body with degreasing agent, attach the name plate to the position shown in the illustration.

HINT:

The working environment should be 20°C when installing the name plate. If the working environment is below 20°C, heat the installation area of the body to 20 to 30°C and then install the name plate.



U180725E02
2.771,3.948 2.656,3.948 2.656,3.948 2.948,4.604 false 2.229,5.604 2.115,5.604 2.115,5.604 2.177,6.146 false 2.615,6.948 2.531,6.948 2.531,6.948 2.625,7.542 false 3.167,1.052 3.385,1.052 3.385,1.052 3.573,1.458 false 2.563,2.167 1.792,2.167 false 3.938,2.198 3.76,2.198 3.76,2.198 3.635,1.688 false 2.625,5.521 4.646,5.677 2.021,0.156 10 false NO. 1 BACK DOOR EMBLEM 3.063,6.885 5.302,7.042 2.24,0.156 10 false NO. 2 BACK DOOR NAME PLATE 3.208,3.875 4.563,4.031 1.354,0.156 10 false SYMBOL EMBLEM 0.354,8.427 1.573,8.604 1.219,0.177 10 false Non-reusable part 2.844,3.865 3.052,4.031 0.208,0.167 10 false (1) 2.281,5.51 2.49,5.667 0.208,0.156 10 false (2) 2.677,6.875 2.885,7.042 0.208,0.167 10 false (3) 1.594,2.083 1.802,2.25 0.208,0.167 10 false (3) 2.958,0.979 3.167,1.146 0.208,0.167 10 false (1) 3.979,2.115 4.188,2.271 0.208,0.156 10 false (2)

U180726E02
2.448,3.156 2.354,3.156 2.354,3.156 2.552,3.906 false 2.49,5.24 2.365,5.24 2.365,5.24 2.479,5.802 false 5.208,1 5.083,1 5.083,1 4.969,1.219 false 2.917,5.156 4.688,5.313 1.771,0.156 10 false NO. 1 ROOF SIDE MARK 2.865,3.094 4.635,3.25 1.771,0.156 10 false NO. 1 ROOF SIDE MARK 0.385,7.417 1.604,7.594 1.219,0.177 10 false Non-reusable part 5.25,0.906 5.479,1.104 0.229,0.198 10 false (1) 2.5,3.073 2.729,3.271 0.229,0.198 10 false (1) 2.563,5.146 2.75,5.344 0.188,0.198 10 false (1)

SYMBOL EMBLEM


B239327E01
2.803,2.416 2.966,2.579 0.163,0.163 10 *1 0.534,2.416 0.697,2.579 0.163,0.163 10 *1 0.715,2.5 0.91,2.5 0.91,2.5 1.034,2.792 false 2.803,2.509 2.577,2.509 2.577,2.509 2.324,3.031 false

Text in Illustration
*1 Boss


NO. 1 BACK DOOR EMBLEM


B239328E01
2.798,0.544 3.455,0.690 0.656,0.146 10 105.0 mm 2.797,0.675 3.463,0.848 0.665,0.173 10 (4.13 in.) 2.532,2.029 3.189,2.175 0.656,0.146 10 10.5 mm 2.531,2.16 3.196,2.333 0.665,0.173 10 (0.413 in.) 5.965,1.938 6.621,2.084 0.656,0.146 10 10.5 mm 5.964,2.069 6.629,2.242 0.665,0.173 10 (0.413 in.) 2.8,2.511 3.457,2.657 0.656,0.146 10 6.0 mm 2.799,2.641 3.465,2.814 0.665,0.173 10 (0.236 in.) 5.14,3.332 5.797,3.478 0.656,0.146 10 6.0 mm 5.14,3.463 5.805,3.636 0.665,0.173 10 (0.236 in.) 5.939,2.502 6.595,2.648 0.656,0.146 10 6.0 mm 5.938,2.633 6.603,2.806 0.665,0.173 10 (0.236 in.) 5.496,2.927 6.153,3.073 0.656,0.146 10 5.5 mm 5.496,3.058 6.161,3.231 0.665,0.173 10 (0.217 in.) 3.173,2.931 3.830,3.077 0.656,0.146 10 4.0 mm 3.172,3.061 3.837,3.234 0.665,0.173 10 (0.157 in.) 3.624,3.352 4.280,3.498 0.656,0.146 10 7.0 mm 3.623,3.483 4.288,3.656 0.665,0.173 10 (0.276 in.) 3.532,0.759 4.112,0.905 0.580,0.146 10 17.5 mm 3.531,0.89 4.196,1.063 0.665,0.173 10 (0.689 in.) 5.112,0.759 5.692,0.905 0.580,0.146 10 17.5 mm 5.111,0.89 5.777,1.063 0.665,0.173 10 (0.689 in.) 5.78,0.544 6.458,0.690 0.677,0.146 10 104.0 mm 5.779,0.675 6.444,0.848 0.665,0.173 10 (4.10 in.) 5.904,2.583 5.733,2.583 5.733,2.583 5.447,2.353 false 5.47,2.999 5.326,2.999 5.326,2.999 5.137,2.576 false 3.344,2.59 3.55,2.59 3.55,2.59 3.81,2.369 false 3.708,3.01 3.929,3.01 3.929,3.01 4.161,2.576 false 5.116,3.402 4.99,3.402 4.99,3.402 4.797,2.804 false 4.142,3.434 4.293,3.434 4.293,3.434 4.475,2.796 false 2.531,0.117 2.720,0.291 0.188,0.174 10 *a

Text in Illustration
*a Reference Value - -


NO. 2 BACK DOOR NAME PLATE


B239329E01
2.956,0.095 3.172,0.328 0.216,0.232 10 *a 3.818,0.056 4.413,0.216 0.596,0.161 10 58.4 mm 3.818,0.21 4.478,0.370 0.661,0.161 10 (2.30 in.) 2.739,1.373 3.514,1.533 0.775,0.161 10 193.4 mm 2.739,1.527 3.622,1.687 0.883,0.161 10 (7.61 in.) 6.221,1.373 6.954,1.533 0.733,0.161 10 198.8 mm 6.221,1.527 6.930,1.687 0.709,0.161 10 (7.83 in.)

Text in Illustration
*a Reference Value - -


NO. 1 ROOF SIDE MARK


B239419E04
0.656,4.375 0.844,4.375 0.844,4.375 1.083,4.979 false 4.063,4.354 4.26,4.354 4.26,4.354 4.406,4.938 false 0.656,7.521 0.833,7.521 0.833,7.521 1.052,8.208 false 4.063,7.542 4.219,7.542 4.219,7.542 4.323,8.177 false 0.479,4.292 0.708,4.469 0.229,0.177 10 false *b 0.719,2.208 0.948,2.385 0.229,0.177 10 false *a 3.885,4.271 4.115,4.448 0.229,0.177 10 false *b 3.906,7.458 4.135,7.635 0.229,0.177 10 false *b 0.469,7.448 0.698,7.625 0.229,0.177 10 false *b 1.167,2.896 1.771,3.052 0.604,0.156 10 false 95.0 mm 1.167,3.042 1.938,3.229 0.771,0.188 10 false (3.74 in.) 2.167,2.802 2.823,2.958 0.656,0.156 10 true 122.1 mm 2.167,2.948 2.906,3.125 0.74,0.177 10 true (4.81 in.) 1.427,3.948 2.083,4.104 0.656,0.156 10 true 346.6 mm 1.427,4.094 2.125,4.281 0.698,0.188 10 true (13.6 in.) 4.927,3.948 5.583,4.104 0.656,0.156 10 false 346.6 mm 4.927,4.094 5.583,4.344 0.656,0.25 10 false (13.6 in.) 4.927,7.198 5.583,7.354 0.656,0.156 10 false 346.9 mm 4.927,7.344 5.625,7.604 0.698,0.26 10 false (13.7 in.) 2.438,7.198 3.094,7.354 0.656,0.156 10 false 346.9 mm 2.438,7.344 3.208,7.5 0.771,0.156 10 false (13.7 in.) 1.438,7.198 2.094,7.354 0.656,0.156 10 true 346.7 mm 1.417,7.344 2.094,7.542 0.677,0.198 10 true (13.6 in.) 1.177,6.156 1.833,6.313 0.656,0.156 10 false 79.6 mm 1.177,6.302 1.813,6.5 0.635,0.198 10 false (3.13 in.) 2.271,6.083 2.927,6.24 0.656,0.156 10 true 149.4 mm 2.271,6.229 2.833,6.448 0.563,0.219 10 true (5.88 in.) 4.51,2.896 5.167,3.052 0.656,0.156 10 true 157.3 mm 4.51,3.042 5.271,3.219 0.76,0.177 10 true (6.19 in.) 5.646,2.802 6.302,2.958 0.656,0.156 10 false 105.2 mm 5.646,2.948 6.375,3.135 0.729,0.188 10 true (4.14 in.) 5.854,3.917 6.51,4.073 0.656,0.156 10 true 370.9 mm 5.854,4.052 6.594,4.25 0.74,0.198 10 true (14.6 in.) 2.417,3.948 3.073,4.104 0.656,0.156 10 false 371.0 mm 2.417,4.094 3.188,4.25 0.771,0.156 10 false (14.6 in.) 6.115,7.177 6.771,7.333 0.656,0.156 10 false 346.6 mm 6.115,7.313 6.844,7.531 0.729,0.219 10 false (13.6 in.) 4.573,6.177 5.229,6.333 0.656,0.156 10 true 141.5 mm 4.573,6.323 5.135,6.5 0.563,0.177 10 true (5.57 in.) 5.646,6.115 6.302,6.271 0.656,0.156 10 false 87.7 mm 5.646,6.26 6.375,6.573 0.729,0.313 10 false (3.45 in.)

Text in Illustration
*a Reference Value *b Over Fender End Line