Home › General › INTRODUCTION › ABOUT THIS VEHICLE
BM1440E _V1 General _056784 INTRODUCTION _0276975 ABOUT THIS VEHICLE F

INTRODUCTION  ABOUT THIS VEHICLE  EXTERIOR RESIN PARTS AND RESIN CHARACTERISTICS  


PLASTIC PROPERTIES CHART


When repairing, some parts may be deformed by the heat. Therefore, confirm the properties of the plastic parts, and remove parts beforehand as necessary.

Code Material Name Heat Resistant Temperature Limit* °C (°F) Resistance to Alcohol or Gasoline Notes
AAS Acrylonitrile Acrylic Styrene 80 (176) Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease)
Avoid gasoline and organic or aromatic solvents.
ABS Acrylonitrile Butadiene Styrene 80 (176) Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease)
Avoid gasoline and organic or aromatic solvents.
AES Acrylonitrile Ethylene Styrene 80 (176) Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease)
Avoid gasoline and organic or aromatic solvents.
ASA Acrylonitrile Styrene Acrylate 80 (176) Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease)
Avoid gasoline and organic or aromatic solvents.
CAB Cellulose Acetate 80 (176) Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease)
Avoid gasoline and organic or aromatic solvents.
EPDM Ethylene Propylene 100 (212) Alcohol is harmless. Gasoline is harmless if applied only for short time in small amounts. Most solvents are harmless but avoid dipping in gasoline, solvents, etc.
EVA Ethylene Acetate 70 (158) Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease)
Avoid gasoline and organic or aromatic solvents.
E/VAC Ethylene/Vinyl Acetate Copolymer Resin 70 (158) Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease)
Avoid gasoline and organic or aromatic solvents.
FRP Fiber Reinforced Plastics 180 (356) Alcohol and gasoline are harmless. Avoid alkali.
PA Polyamide (Nylon) 80 (176) Alcohol and gasoline are harmless. Avoid battery acid.
PBT Polybutylene Terephthalate 160 (320) Alcohol and gasoline are harmless. Most solvents are harmless.
PC Polycarbonate 120 (248) Alcohol is harmless. Avoid gasoline, brake fluid, wax, wax removers and organic solvents. Avoid alkali.
PE Polyethylene 80 (176) Alcohol and gasoline are harmless. Most solvents are harmless.
PEI Polyetherimide 160 (320) Alcohol and gasoline are harmless. Most solvents are harmless.
PET Polyethylene Terephthalate 75 (167) Alcohol and gasoline are harmless. Avoid dipping in water.
PGM Polypropylene Glass Fiber Pulp 80 (176) Alcohol and gasoline are harmless. Most solvents are harmless.
PMMA Polymethyl Methacrylate 80 (176) Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease)
Avoid dipping or immersing in alcohol, gasoline, solvents, etc.
POM Polyoxymethylene (Polyacetal) 100 (212) Alcohol and gasoline are harmless. Most solvents are harmless.
PP Polypropylene 80 (176) Alcohol and gasoline are harmless. Most solvents are harmless.
PPC Polyphthlate Carbonate 149 (300) Alcohol and gasoline are harmless. Most solvents are harmless.
PPE Polyphenylene Ether 80 (176) Alcohol is harmless if applied only for short time in small amounts (e.g., quick wiping to remove grease). Avoid dipping or immersing in alcohol, gasoline, solvents, etc.
PPF Composite Reinforced Polypropylene 80 (176) Alcohol and gasoline are harmless. Most solvents are harmless.
PPO Modified Polyphenylene Oxide 100 (212) Alcohol is harmless. Gasoline is harmless if applied only for quick wiping to remove grease.
PS Polystyrene 60 (140) Alcohol and gasoline are harmless if applied only for short time in small amounts. Avoid dipping or immersing in alcohol, gasoline, solvents, etc.
PUR Polyurethane 80 (176) Alcohol is harmless if applied only for very short time in small amounts.
(e.g., quick wiping to remove grease)
Avoid dipping or immersing in alcohol, gasoline, solvents, etc.
PVC Polyvinylchloride (Vinyl) 80 (176) Alcohol and gasoline are harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease)
Avoid dipping or immersing in alcohol, gasoline, solvents, etc.
SAN Styrene Acrylonitrile 80 (176) Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease)
Avoid dipping or immersing in alcohol, gasoline, solvents, etc.
TPE Thermoplastic Elastomer 80 (176) Alcohol is harmless. Gasoline is harmless if applied only for short time in small amounts. Most solvents are harmless but avoid dipping in gasoline, solvents, etc.
TPO Thermoplastic Olefine 80 (176) Alcohol is harmless. Gasoline is harmless if applied only for short time in small amounts. Most solvents are harmless but avoid dipping in gasoline, solvents, etc.
TPU Thermoplastic Polyurethane 80 (176) Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease)
Avoid dipping or immersing in alcohol, gasoline, solvents, etc.
TSOP TOYOTA Super Olefine Polymer 80 (176) Alcohol and gasoline are harmless. Most solvents are harmless.
UP Unsaturated Polyester 110 (233) Alcohol and gasoline are harmless. Avoid alkali.

*The heat resistant temperature means a temperature that may cause heat deformation during a procedure.



THE PLASTIC BODY PARTS MATERIAL LIST


K122657C01
4.26,4.813 6.604,6.177 2.344,1.365 0.208,6.583 7,8.438 6.792,1.854 5.073,1.375 5.552,0.958 5.552,0.958 5.719,0.958 false 1.323,3.083 0.5,1.417 0.5,1.417 0.333,1.417 false 1.531,3.104 0.75,1 0.75,1 0.583,1 false 1.906,2.771 1.167,0.667 1.167,0.667 1,0.667 false 2.115,2.344 1.5,0.417 1.5,0.417 1.333,0.417 false 2.802,2.781 2.865,0.49 2.865,0.49 2.99,0.49 false 3.333,2.646 3.552,0.385 3.552,0.385 3.688,0.385 false 3.521,2.74 4,0.583 4,0.583 4.167,0.583 false 4.698,1.802 4.583,0.75 4.583,0.75 4.333,1.333 false 4.583,0.74 4.833,0.74 false 5.406,2.646 6.219,3.229 6.219,3.229 6.385,3.229 false 4.813,3.135 5.667,3.75 5.667,3.75 5.833,3.75 false 4.521,3.469 5.083,4 5.083,4 5.25,4 false 3.917,3.458 4.573,4.313 4.573,4.313 4.729,4.313 false 2.917,3.333 3.667,4.417 3.667,4.417 3.833,4.417 false 2.375,3.708 3.083,4.917 3.083,4.917 3.25,4.917 false 2,3.333 2.333,5.083 2.333,5.083 2.5,5.083 false 1.927,3.719 1.917,5.167 1.917,5.167 1.75,5.167 false 1.823,3.708 1.417,5 1.417,5 1.25,5 false 1.635,3.656 0.938,4.75 0.938,4.75 0.75,4.75 false 1.417,3.542 0.667,4.167 0.667,4.167 0.5,4.167 false 1.417,3.167 0.667,3.583 0.667,3.583 0.5,3.583 false 6.24,5.927 6.073,5.927 6.073,5.927 5.656,5.677 false 5.5,5.583 5.167,5.167 5.167,5.167 5,5.167 false 5.667,8.083 5.5,8.083 5.5,8.083 4.917,7.667 false 1.333,7.99 1.5,7.99 1.5,7.99 2.26,7.74 false 2,8.25 2.167,8.25 2.167,8.25 2.531,7.844 false 4.333,4.875 4.656,5.115 0.323,0.24 10 false *A 0.385,6.698 0.771,6.927 0.385,0.229 10 false *B 0.125,1.333 0.333,1.625 0.208,0.292 10 false *1 0.417,0.917 0.583,1.167 0.167,0.25 10 false *2 0.833,0.583 1,0.833 0.167,0.25 10 false *3 1.167,0.333 1.333,0.604 0.167,0.271 10 false *4 3.052,0.385 3.365,0.542 0.313,0.156 10 false *5 3.729,0.292 3.969,0.51 0.24,0.219 10 false *6 4.188,0.5 4.5,0.656 0.313,0.156 10 false *7 4.865,0.667 5.177,0.823 0.313,0.156 10 false *8 5.781,0.875 6.094,1.031 0.313,0.156 10 false *9 6.417,3.146 6.885,3.302 0.469,0.156 10 false *10 5.865,3.646 6.333,3.802 0.469,0.156 10 false *11 5.281,3.896 5.76,4.063 0.479,0.167 10 false *12 5.688,7.99 6.167,8.208 0.479,0.219 10 false *13 3.875,4.323 4.344,4.479 0.469,0.156 10 false *14 3.281,4.823 3.583,5.094 0.302,0.271 10 false *15 2.531,5 2.833,5.25 0.302,0.25 10 false *16 1.5,5.083 1.729,5.333 0.229,0.25 10 false *17 1.031,4.917 1.25,5.167 0.219,0.25 10 false *18 1.042,7.896 1.344,8.146 0.302,0.25 10 false *19 0.25,4.083 0.5,4.333 0.25,0.25 10 false *20 0.25,3.5 0.5,3.833 0.25,0.333 10 false *21 6.26,5.833 6.51,6.083 0.25,0.25 10 false *22 1.76,8.156 2,8.417 0.24,0.26 10 false *23 0.5,4.667 0.75,4.917 0.25,0.25 10 false *19 4.771,4.219 5.083,4.5 0.313,0.281 10 false *13 4.792,5.083 4.979,5.313 0.188,0.229 10 false *7
*A w/ Side Turn Signal Light *B for X-Runner, S-Runner
*1 Radiator Grille No. 2 Moulding (ASA, ABS) *2 Radiator Grille (ABS/AES)
*3 Hood Bulge (PA/PPE) *4 Front Fender To Cowl Side Seal (PP/EPDM)
*5 Cowl Top Ventilator Louver (PP) *6 Outer Rear View Mirror (PA, ASA)
*7 Outer Mirror Cover (ABS) *8 Roof Drip Side Moulding (ASA/TPO)
*9 Telephone Antenna Base (PC/ABS) *10 Quarter Outside Moulding (TSOP)
*11 Rear Door Outside Moulding (TSOP) *12 Step Plate (TSOP)
*13 Rocker Panel Moulding (TSOP) *14 Front Wheel Opening Extension (TSOP)
*15 Front Bumper Extension (TSOP) *16 Headlight (PC/PP)
*17 Front Bumper Hole Cover (TSOP, PC/ABS) *18 Front Turn Signal Light (PMMA/PC)
*19 Front Bumper Cover (TSOP) *20 Radiator Lower Grille (TSOP)
*21 Emblem (ABS) *22 Side Turn Signal Light (PMMA/ASA)
*23 Front Bumper Moulding (PC/ABS) - -


/ Made up of 2 or more kinds of materials.

, Resin material differs with model.


K122658C01
1.781,0.198 5.75,1.833 3.969,1.635 0.333,6.5 6.833,8.583 6.5,2.083 3.635,0.604 3.417,0.417 3.417,0.417 4.573,0.958 false 2.583,0.813 3.417,0.417 3.417,0.417 3.479,1.198 false 3.427,0.417 4.396,0.417 false 4.771,3.188 4.583,2.083 4.583,2.083 4.75,2.083 false 4.917,3.281 5.25,2.417 5.25,2.417 5.417,2.417 false 5.302,3.99 6,3.167 6,3.167 6.167,3.167 false 4.833,4.125 5.833,5 5.833,5 6,5 false 5.833,5 5.177,4.031 false 4.583,4.938 5,5.667 5,5.667 5.167,5.667 false 4.25,3.854 4.667,5.917 4.667,5.917 4.833,5.917 false 3.833,5 3.917,5.917 3.917,5.917 3.75,5.917 false 3.646,4.688 3.333,6.167 3.333,6.167 3.167,6.167 false 3.396,3.646 3,5.667 3,5.667 2.833,5.667 false 4.75,7.021 4.583,7.021 4.583,7.021 3.667,7.771 false 3.615,7.885 4.583,8.333 4.583,8.333 2.635,8.167 false 4.833,8.333 4.583,8.333 4.583,8.333 3.365,7.979 false 4.167,4.333 4.5,6.167 4.5,6.167 4.333,6.167 false 3.01,4.646 2.417,5.49 2.417,5.49 2.25,5.49 false 3.104,3.823 2,4.927 2,4.927 1.51,4.927 false 5.021,3.938 5.833,2.75 5.833,2.75 6,2.75 false 4.427,4.51 5.833,2.75 5.833,2.75 5.083,4.042 false 2,4.917 2.531,3.531 false 2.469,3.49 2,2.333 false 1.417,2.333 2,2.333 2,2.333 3.042,3.781 false 2.854,2.917 3.083,2 3.083,2 1.75,2 false 2.813,2.875 3.083,2 false 2,3.958 1.406,4.51 1.406,4.51 1.24,4.51 false 4.083,6.073 4.323,6.333 0.24,0.26 10 false *11 3.5,5.833 3.75,6.083 0.25,0.25 10 false *12 2.615,5.583 2.833,5.833 0.219,0.25 10 false *14 2,5.417 2.25,5.667 0.25,0.25 10 false *15 1.229,4.833 1.5,5.083 0.271,0.25 10 false *16 0.99,4.417 1.24,4.677 0.25,0.26 10 false *17 4.875,8.229 5.25,8.417 0.375,0.188 10 false *18 1.906,0.292 2.24,0.521 0.333,0.229 10 false *A 0.5,6.594 0.75,6.917 0.25,0.323 10 false *B 4.458,0.344 4.802,0.625 0.344,0.281 10 false *1 1.563,1.906 1.75,2.125 0.188,0.219 10 false *2 1.24,2.25 1.406,2.5 0.167,0.25 10 false *3 4.771,2 5,2.24 0.229,0.24 10 false *4 5.427,2.302 5.656,2.542 0.229,0.24 10 false *5 6.021,2.667 6.333,2.823 0.313,0.156 10 false *6 6.198,3.073 6.427,3.313 0.229,0.24 10 false *7 6.01,4.896 6.406,5.146 0.396,0.25 10 false *8 5.198,5.583 5.604,5.844 0.406,0.26 10 false *9 4.917,5.823 5.156,6.083 0.24,0.26 10 false *10 2.917,6.083 3.167,6.333 0.25,0.25 10 false *13 4.802,6.927 5.208,7.188 0.406,0.26 10 false *9
*A w/ Roof Rack *B for X-Runner, S-Runner
*1 Roof Rack Leg Cover (PC/ASA, ABS) *2 Door Window Frame Moulding (ASA)
*3 Door Outside Handle (PC/PBT, PA) *4 Rear Spoiler Cover (ABS)
*5 Stop Center Light (PMMA/ASA) *6 Emblem (ABS)
*7 Back Door Outside Garnish (ABS) *8 License Plate Light (PC/PA)
*9 Rear Bumper Cover (TSOP) *10 Back Door Outside Moulding (ASA)
*11 Rear Combination Light (PMMA/ASA) *12 Quarter Panel Rear Mudguard (PP)
*13 Rear Bumper Side Moulding (TSOP) *14 Roof Side Name Plate (ABS)
*15 Rocker Panel Moulding Protector No. 1 (PP) *16 Door Outside Handle Cover (PC/ABS, PC/PBT, PA)
*17 Front Fender Mudguard (PP) *18 Rear Bumper Moulding (PC/ABS)


/ Made up of 2 or more kinds of materials.

, Resin material differs with model.