OUTLINE
Exhaust Emission Control System
Three-Way Catalytic converters (TWCs) are used to reduce emissions in the exhaust gas.
An air injection control system is used*.
Based on the signals from the air fuel ratio sensor and oxygen sensor, the ECM controls the fuel injection volume in order to optimize the emissions in the exhaust gas.
*: Models with Air Injection Control System
Evaporative Emission Control System
The ECM controls the purge flow of evaporative emissions (HC) in the charcoal canister in accordance with engine conditions*1.
The evaporative emission control system prevents the fuel vapor that is created in the fuel tank assembly from being released directly into the atmosphere*2.
The canister stores the fuel vapor that has been created in the fuel tank assembly*2.
This system consists of a purge VSV, canister, canister pump module, and ECM*2.
The ECM controls the purge VSV in accordance with the driving conditions in order to direct the fuel vapor into the engine, where it is burned*2.
In this system, the ECM checks for evaporative emission leaks and stores Diagnostic Trouble Codes (DTCs) in the event of a malfunction. An evaporative emission leak check consists of an application of vacuum to the evaporative emission system and the ECM monitoring the system for changes in pressure in order to detect a leak*2.
An Onboard Refueling Vapor Recovery (ORVR) function is provided in the refueling valve*2.
The canister pressure sensor is included in the canister pump module*2.
A canister filter is provided on the fresh air line. This air filter is maintenance-free*2.
*1: Models without Onboard Refueling Vapor Recovery (ORVR) Function
*2: Models with Onboard Refueling Vapor Recovery (ORVR) Function