Home › Engine / Hybrid System › 1GR-FE EMISSION CONTROL › EMISSION CONTROL SYSTEM › 2009.08–2014.08
NM1440E _51 Engine / Hybrid System _056081 1GR-FE EMISSION CONTROL _0273699 EMISSION CONTROL SYSTEM UN GENERAL/CONTROL/DETAILS F

1GR-FE EMISSION CONTROL  EMISSION CONTROL SYSTEM  GENERAL/CONTROL/DETAILS  DETAILS  


FUNCTION OF MAIN COMPONENTS


a.

The main components of the exhaust emission control system are as follows:

Component Function
Exhaust Emission Control System ECM Determines an optimal fuel injection volume based on the signals from various sensors.
TWC Reduces CO, HC and NOx in the exhaust gas.
Heated Oxygen Sensor Detects the oxygen concentration in the exhaust emissions by measuring the electromotive force generated in the sensor itself. For details, see the 1GR-FE Engine Control.
Air Fuel Ratio Sensor
Evaporative Emission Control System ECM Sends signals to the No. 1 vacuum switching valve assembly (VSV for EVAP) to control the purge flow.
Charcoal Canister Contains activated charcoal to absorb the fuel vapor created in the fuel tank assembly.
No. 1 Vacuum Switching Valve Assembly (VSV for EVAP) Opens in accordance with the signals from the ECM when the system is purging, in order to send the fuel vapor that was absorbed by the charcoal canister assembly into the intake manifold.



CONSTRUCTION


a.

Three-Way Catalytic converter (TWC)

i.

2 TWCs have been provided for the front exhaust pipe assembly.


ii.

Ultra thin-wall, high-cell density ceramic type TWCs are used.

W102179E02
2.844,1.271 2.281,2.292 2.281,2.292 1.75,2.292 true 4.896,1.635 5.5,0.604 5.5,0.604 6.042,0.604 true 1.573,2.188 1.917,2.458 0.344,0.271 10 false *1 6.063,0.5 6.406,0.771 0.344,0.271 10 false *2

Text in Illustration
*1 Exhaust Manifold Sub-assembly - TWC *2 TWC



b.

Charcoal Canister

i.

Contains activated charcoal to absorb the fuel vapor that is created in the fuel tank assembly.

W102176E02
3.604,0.688 3.135,0.208 3.135,0.208 2.24,0.208 true 3.375,0.854 3.063,0.542 3.063,0.542 2.24,0.542 true 3.271,1.01 3.188,0.927 3.188,0.927 2.24,0.927 true 2.25,1.385 3.083,1.385 true 2.073,0.438 2.375,0.698 0.302,0.26 10 false *4 2.073,0.104 2.375,0.365 0.302,0.26 10 false *3 2.073,0.823 2.375,1.083 0.302,0.26 10 false *2 2.073,1.281 2.375,1.542 0.302,0.26 10 false *1

Text in Illustration
*1 Charcoal Canister *2 Fresh Air Port
*3 EVAP Port (From Fuel Tank) *4 Purge Port (To Intake Manifold)




OPERATION


a.

Evaporative Emission Control System

i.

Based on the signals from various sensors, the ECM opens and closes the No. 1 vacuum switching valve assembly (VSV for EVAP). Thus, it controls the purge flow of evaporative emissions (HC) in the charcoal canister in accordance with the engine conditions.