Home › Engine / Hybrid System › 1GR-FE INTAKE / EXHAUST › INTAKE SYSTEM
NM1440E _51 Engine / Hybrid System _056082 1GR-FE INTAKE / EXHAUST _0273700 INTAKE SYSTEM UN GENERAL/CONTROL/DETAILS F

1GR-FE INTAKE / EXHAUST  INTAKE SYSTEM  GENERAL/CONTROL/DETAILS  DETAILS  


CONSTRUCTION


a.

Air Cleaner Assembly

i.

A nonwoven, full-fabric type air cleaner filter element is used.


ii.

A cyclone pre-cleaner has been provided in the air cleaner inlet. This cyclone pre-cleaner has a screw shape and gathers dusts which has rather big size in a dust cup by swirling the inlet air. The dust cup is removable, so the dust gathered can be disposed.

W102188E03
5.427,3.458 5.24,3.844 5.24,3.844 5.135,3.844 true 4.542,3.01 4.375,2.604 4.375,2.604 4.198,2.604 true 1.219,3.667 0.906,3.375 0.906,3.375 0.75,3.375 true 1.167,2.865 0.948,2.625 0.948,2.625 0.76,2.625 true 1.667,1.958 1.458,1.646 1.458,1.646 1.333,1.646 true 2.01,1.031 1.583,1.031 true 5.24,2.302 5.115,2.969 true 4.927,3.042 5.063,2.313 5.063,2.313 5.469,2.313 true 1.417,0.927 1.677,1.208 0.26,0.281 10 false *1 1.167,1.542 1.427,1.823 0.26,0.281 10 false *2 0.594,2.521 0.854,2.802 0.26,0.281 10 false *3 0.594,3.271 0.854,3.552 0.26,0.281 10 false *4 5.5,2.208 5.76,2.49 0.26,0.281 10 false *a 4.031,2.5 4.292,2.781 0.26,0.281 10 false *5 4.969,3.74 5.229,4.021 0.26,0.281 10 false *6

Text in Illustration
*1 Air Cleaner Cap Sub-assembly *2 Air Cleaner Filter Element Sub-assembly
(Nonwovens Fabric)
*3 Air Cleaner Case Sub-assembly *4 Cyclone Pre-cleaner
*5 Turbinated Blade *6 Dust Cup
*a Swirl Air Flow - -



b.

Throttle Body

i.

A cable-less type throttle body in which the throttle position sensor and the throttle control motor are integrated is used. It realizes excellent throttle valve control.


ii.

The throttle control motor uses a DC motor with excellent response and minimal power consumption. The ECM performs duty ratio control of the direction and the amperage of the current that flows to the throttle control motor in order to regulate the throttle valve angle.

W102157E02
2.688,1.365 1.583,1.365 true 3.823,2.01 4.385,2.5 4.385,2.5 4.781,2.5 true 4.823,2.396 5.021,2.583 0.198,0.188 10 false *2 1.406,1.26 1.604,1.448 0.198,0.188 10 false *1

Text in Illustration
*1 Throttle Position Sensor *2 Throttle Control Motor



c.

Intake Air Surge Tank

i.

The intake air surge tank has been made of plastic to reduce the weight and the amount of heat transferred from the cylinder head. As a result, it has become possible to reduce the intake air temperature and improve the intake volumetric efficiency.

W102158



d.

Intake Manifold

i.

A light weight aluminum alloy is used for the intake manifold.


ii.

The No. 1 and No. 2 intake manifold to head gaskets have a rubber coating applied to their surfaces. They provide superior durability.

W102190E03
0.885,0.313 1.115,0.313 1.115,0.313 1.615,0.906 true 0.958,2.938 0.958,3.333 true 3.958,2.938 3.958,3.323 true 0.708,0.208 0.958,0.396 0.25,0.188 10 false *1 0.615,2.583 0.771,2.771 0.156,0.188 10 false A 1.208,2.771 1.365,2.958 0.156,0.188 10 false A 0.896,3.333 1.146,3.521 0.25,0.188 10 false *2 3.885,3.323 4.135,3.51 0.25,0.188 10 false *3 5.083,0.573 5.26,0.771 0.177,0.198 10 false *a

Text in Illustration
*1 Intake Manifold *2 No.1 Intake Manifold to Head Gasket
*3 No.2 Intake Manifold to Head Gasket - -
*a A - A Cross Section - -
V100155

Rubber Coating - -