CONSTRUCTION
Exhaust Manifold Sub-assemblies (RH and LH)
Stainless steel exhaust manifolds with an integrated Three-Way Catalytic converter (TWC) are used for warm-up of the TWC and for weight reduction.
| *A | For Right Bank | *B | For Left Bank |
| *1 | Exhaust Manifold Sub-assembly RH - TWC | *2 | Exhaust Manifold Sub-assembly LH - TWC |
Exhaust Pipe
The exhaust pipes are made of stainless steel for improved rust resistance.
A thin-wall, ceramic type TWC is used.
A main muffler is used to ensure engine performance and reduce exhaust noise.
A ball joint is used to join the exhaust front pipe assembly, exhaust center pipe assembly and exhaust tail pipe assembly. As a result, in-vehicle sound has been muffled, vibration has been minimized, and weight reduction has been realized.
| *1 | Front Exhaust Pipe Assembly | *2 | Center Exhaust Pipe Assembly |
| *3 | Main Muffler | *4 | Tail Pipe Assembly |
| *5 | Gasket | *6 | Compression Spring |
| *a | Ball Joint | - | - |