Home › Engine / Hybrid System › 1GR-FE INTAKE / EXHAUST › EXHAUST SYSTEM › from 2014.08
NM1440E _51 Engine / Hybrid System _056082 1GR-FE INTAKE / EXHAUST _0273701 EXHAUST SYSTEM UN GENERAL/CONTROL/DETAILS F

1GR-FE INTAKE / EXHAUST  EXHAUST SYSTEM  GENERAL/CONTROL/DETAILS  DETAILS  


CONSTRUCTION


a.

Exhaust Manifold Sub-assemblies (RH and LH)

i.

Stainless steel exhaust manifolds with an integrated Three-Way Catalytic converter (TWC) are used for warm-up of the TWC and for weight reduction.


ii.

The air injection pipe directs air from the air pump assembly to the air injection port on the cylinder head.*

*: Models with Air Injection Control System


W102161E02
1.813,1.583 1.448,1.583 true 5.615,1.583 5.25,1.583 true 1.844,1.479 2.135,1.729 0.292,0.25 10 false *1 5.094,1.479 5.385,1.729 0.292,0.25 10 false *2 3.76,0.208 4.052,0.458 0.292,0.25 10 false *B 0.26,0.208 0.552,0.458 0.292,0.25 10 false *A

Text in Illustration (Models without Air Injection Control System: )
*A for Right Bank *B for Left Bank
*1 Exhaust Manifold Sub-assembly RH - TWC *2 Exhaust Manifold Sub-assembly LH - TWC

W109862E03
1.344,0.208 1.771,0.208 1.771,0.208 2.188,0.604 true 4.792,0.865 4.375,0.865 4.375,0.865 3.948,1.271 true 1.927,2.031 2.354,2.031 2.354,2.031 3.208,1.24 true 5.719,1.292 5.302,1.292 5.302,1.292 4.583,1.958 true 1.167,0.104 1.385,0.333 0.219,0.229 10 false *3 4.802,0.76 5.021,0.99 0.219,0.229 10 false *3 1.76,1.927 1.979,2.146 0.219,0.219 10 false *1 5.75,1.188 5.969,1.406 0.219,0.219 10 false *2

Text in Illustration (Models with Air Injection Control System: )
*1 Exhaust Manifold Sub-assembly RH - TWC *2 Exhaust Manifold Sub-assembly LH - TWC
*3 Air Injection Pipe - -



b.

Exhaust Pipe

i.

The exhaust pipes are made of stainless steel for improved rust resistance.


ii.

A thin-wall, ceramic type TWC is used.


iii.

A main muffler is used to ensure engine performance and reduce exhaust noise.


iv.

A ball joint is used to join the exhaust front pipe assembly, exhaust center pipe assembly and exhaust tail pipe assembly. As a result, in-vehicle sound has been muffled, vibration has been minimized, and weight reduction has been realized.

W102162E02
3.729,0.896 4.177,0.823 4.177,0.823 4.51,0.823 true 3.823,1.615 4.156,1.917 4.156,1.917 4.51,1.917 true 4.406,3.135 4.667,3.813 4.667,3.813 4.854,3.813 true 6.021,2.219 6.26,2.969 6.26,2.969 6.448,2.969 true 1.719,2.302 2.167,2.302 2.167,2.302 2.563,3.365 true 3.583,3.135 4.115,4.427 4.115,4.427 4.854,4.427 true 2.635,0.302 2.906,0.542 0.271,0.24 10 false *a 4.896,4.323 5.167,4.563 0.271,0.24 10 false *2 1.531,2.198 1.802,2.427 0.271,0.229 10 false *1 4.896,3.708 5.167,3.958 0.271,0.25 10 false *3 4.552,0.719 4.823,0.948 0.271,0.229 10 false *5 6.479,2.865 6.75,3.083 0.271,0.219 10 false *4 4.552,1.813 4.823,2.042 0.271,0.229 10 false *6

Text in Illustration (Models without Air Injection Control System: )
*1 Front Exhaust Pipe Assembly *2 Center Exhaust Pipe Assembly
*3 Main Muffler *4 Tail Pipe Assembly
*5 Gasket *6 Compression Spring
*a Ball Joint - -

W109863E03
3.698,1.448 4.24,1.25 4.24,1.25 4.542,1.25 true 3.854,2.188 4.229,2.469 4.229,2.469 4.469,2.469 true 5.99,2.823 6.396,3.667 6.396,3.667 6.635,3.667 true 4.896,3.563 5.302,4.406 5.302,4.406 5.552,4.406 true 3.448,3.75 3.854,4.583 3.854,4.583 4.104,4.583 true 2.5,3.948 1.583,2.719 1.583,2.719 1.344,2.719 true 2.635,0.865 2.833,1.031 0.198,0.167 10 false *a 4.573,1.146 4.781,1.375 0.208,0.229 10 false *5 4.5,2.365 4.708,2.594 0.208,0.229 10 false *6 6.656,3.563 6.865,3.792 0.208,0.229 10 false *4 5.563,4.302 5.771,4.531 0.208,0.229 10 false *3 4.125,4.479 4.333,4.708 0.208,0.229 10 false *2 1.167,2.615 1.375,2.844 0.208,0.229 10 false *1

Text in Illustration (Models with Air Injection Control System: )
*1 Front Exhaust Pipe Assembly *2 Center Exhaust Pipe Assembly
*3 Main Muffler *4 Tail Pipe Assembly
*5 Gasket *6 Compression Spring
*a Ball Joint - -