Home › Drivetrain › VF4BM TRANSFER / 4WD / AWD › FOUR WHEEL DRIVE CONTROL SYSTEM
NM1440E _52 Drivetrain _056089 VF4BM TRANSFER / 4WD / AWD _0273708 FOUR WHEEL DRIVE CONTROL SYSTEM UN GENERAL/CONTROL/DETAILS F

VF4BM TRANSFER / 4WD / AWD  FOUR WHEEL DRIVE CONTROL SYSTEM  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

The full-time 4WD system optimally controls torque distribution to the front and rear wheels to realize superior traction performance in various road conditions.



SPECIFICATION


Transfer Type VF4BM
Drive Type Full-time
Gear Type Single Pinion Planetary
Gear Ratio H4F/H4L 1.000
L4L 2.566
Center Differential Type TORSEN*1 Limited Slip Differential (LSD)
Oil Viscosity SAE 75W
Oil Type Toyota Genuine Transfer Gear Oil LF or equivalent
Oil Capacity L (US qts, Imp. qts) 1.4 (1.5, 1.3)
Weight (Reference)*2 kg (lb) 41.2 (90.8)

HINT:

*1: TORSEN is JTEKT CORPORATION's registered trademark.

*2: The weight shown is the weight of the part fully filled with fluid.



MAIN FEATURES


a.

The optimum mode to suit the road conditions is selected from the 3 type (H4F, H4L and L4L) transfer modes by operating the transfer position switch.

Transfer Mode Transfer Position Center Differential Condition Outline
H4F High Free
·

It ensures excellent traction performance to suit the various road conditions and vehicle speeds.

·

The center differential controls torque distribution to the front and rear wheels.


H4L High Lock
·

It ensures impressive ability to negotiate in sand, mud, snow, etc.

·

The center differential is locked to exert grip to the wheels.


L4L Low Lock
·

It is selected to use large driving force such as when driving on extremely bumpy surfaces of off-road terrain that is very slippery and uphill terrain with steep inclines.

·

The center differential is locked to exert grip to the wheels.