OUTLINE
Audio Head Unit
A Thin Film Transistor Liquid Crystal Display (TFT LCD) is used for the multi-display of the radio receiver assembly. The multi-display shows the audio screen, Bluetooth hands-free screen, vehicle information screen, etc. and can be operated using touch operation, flick operation or drag operation.
| *a | Flick Operation | *b | Drag Operation |
The audio source can be switched on the audio source selection screen. The arrangement of the audio sources displayed on the audio source screen can be changed according to the frequency of use.
Discs containing MPEG audio layer-3 (MP3) files, Windows Media Audio (WMA) files and Advanced Audio Coding (AAC) files can be played.
Discs with the marks shown below can be played.
The list of currently receivable radio stations (except analog AM radio stations) that are categorized according to their broadcasting contents, such as Classical, Rock or Jazz, is displayed.
On the radio screen of the display audio system, up to 36* radio station presets for different tuners can be displayed. Additionally, text information from the selected station can be displayed. It is possible to store 6 sets of 6 presets.
*: The total number of radio station mix presets can be changed within the range of 6 to 36 to meet the user's preference.
If the radio program is disturbed due to a phone call, time shifted playback is available after the call by caching the radio program either automatically or manually.
Automatic Sound Levelizer (ASL)
The Automatic Sound Levelizer (ASL) function automatically adjusts the sound volume in order to enable clear audio quality even when vehicle noise increases (as vehicle noise increases, the volume is turned up, etc.).
Vehicle speed signals are received from the combination meter assembly and used for ASL control.
USB Audio System
A USB port is provided that enables operation of a USB memory stick, Media Transfer Protocol (MTP) device, portable audio player (USB type), iPhone, iPod, iPod classic, iPod nano or iPod touch.
iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
The following iPhone, iPod, iPod classic, iPod nano and iPod touch devices can be used with this system.
iPod touch (5th generation)*
iPod touch (4th generation)
iPod touch (3rd generation)
iPod touch (2nd generation)
iPod touch (1st generation)
iPod classic
iPod with video
iPod nano (7th generation)*
iPod nano (6th generation)
iPod nano (5th generation)
iPod nano (4th generation)
iPod nano (3rd generation)
iPod nano (2rd generation)
iPod nano (1st generation)
iPhone 5*
iPhone 4S
iPhone 4
iPhone 3GS
iPhone 3G
iPhone
*: iPod video not supported.
Depending on differences between models or software versions etc., some models might be incompatible with this system.
USB memory devices that meet the following specifications are supported:
| USB Communication Speed | USB 2.0, High Speed (480 Mbps) |
| File System | FAT 16/32 (Windows) |
| Device Class | Mass Storage Class |
| File Format | MP3, WMA, AAC |
Bluetooth Audio System
The Bluetooth audio system enables users to enjoy music played on a portable player from the vehicle speakers via wireless communication.
The Bluetooth specifications and profiles required for operation are as follows:
| Specification / Profile | Version | |
|---|---|---|
| Bluetooth Specification | Version 1.1 | Required |
| Version 2.1+EDR | Recommended | |
| Version 3.0+EDR | Recommended | |
| Profile | Advanced Audio Distribution Profile (A2DP) Version 1.0 | Required |
| Advanced Audio Distribution Profile (A2DP) Version 1.2 | Recommended | |
| Audio/Video Remote Control Profile (AVRCP) Version 1.0 | Required | |
| Audio/Video Remote Control Profile (AVRCP) Version 1.3 | Recommended | |
| Audio/Video Remote Control Profile (AVRCP) Version 1.4 | Recommended | |
Bluetooth Hands-free System
The Bluetooth hands-free system allows the user to make or receive a call without taking their hands off the steering wheel when the system is linked with a Bluetooth-compatible cellular phone.
| Specification / Profile | Version | |
|---|---|---|
| Bluetooth Specification | Version 1.1 or higher | Required |
| Version 2.1+EDR or higher | Recommended | |
| Profile | Hands Free Profile (HFP) Version 1.0 or higher | Required |
| Hands Free Profile (HFP) Version 1.5 or higher | Recommended | |
| Object Push Profile (OPP) Version 1.1 or higher | Required | |
| Phone Book Access Profile (PBAP) Version 1.0 or higher | Required | |
The operation of the interrupt call function of the Bluetooth hands-free system may vary with the Bluetooth phone or the telephone company that is used.
|
"Bluetooth" is a trademark owned by Bluetooth SIG, Inc. |
The some profiles described above may not be supported in the system depending on the audio head unit equipped.
If the specification of the connected Bluetooth phone is lower than the recommended or does not support the functions required, the available functions may be limited.
The connection history with Bluetooth devices that is stored in memory of the audio head unit can be checked using the Techstream.
Application (Models with Display Audio System)
By operating the application, which is preinstalled in the radio and display receiver assembly, with on-screen commands on the multi-display, functions such as the MirrorLink function can be used.
Available applications are listed in the following table:
| Application | Outline | |
|---|---|---|
| Preinstall Application | MirrorLink*1 | To utilize the MirrorLink function, it is necessary to connect a compatible smartphone*2 to the radio and display receiver assembly using a USB cable. After a connection is established, the screen of the smartphone is displayed on the multi-display. Using this screen, the user can operate applications installed on the smartphone and listen to the audio of the smartphone via the vehicles speakers. |
*1: MirrorLink is a registered trademark of Car Connectivity Consortium, Inc.
*2: This function is not available if the smartphone does not support Car Connectivity Consortium.
| *1 | MirrorLink Screen | *2 | Smartphone |
| *a | Connection via USB cable | *b | The illustrations shown are examples only. The illustrations may differ from the actual vehicle screens. |
Steering Pad Switch Assembly
Due to the adoption of a 4 way switch, back and enter switches, the driver can operate the audio and Bluetooth hands-free functions without taking their hands off the steering wheel.
SPECIFICATION
Audio Head Unit
| Audio Head Unit | Design | Specification |
|---|---|---|
| Radio and Display Receiver Assembly |
|
Display Audio System:
·
6.1-inch Wide Liquid Crystal Display (WVGA Type) ·
Display language supported: English and Spanish ·
AM/FM Tuner ·
Automatic Sound Levelizer (ASL) ·
DVD Player: Compatible with MPEG audio layer-3 (MP3) files, Windows Media Audio (WMA) files and Advanced Audio Coding (AAC) files ·
CD-TEXT Display Function ·
Bluetooth Audio ·
Bluetooth Hands-free System ·
Portable Audio Player (USB type) Interface ·
iPod/iPhone Interface ·
USB Memory Device Interface ·
MirrorLink ·
Media Transfer Protocol (MTP) Device (Models with Extension Module) ·
Stereo Jack Adapter ·
8-speaker System ·
Unit: Pioneer |
8-speaker System
| Location | Speaker Type | Quantity | Size | Impedance | Rated Input Power |
|---|---|---|---|---|---|
| *1 | Squawker | 2 | 6.5 cm (2.6 in.) | 4 Ω | 17.5 W |
| *2 | Full Range | 2 | 15 X 23 cm (6 X 9 in.) | 4 Ω | 20 W |
| *3 | Full Range | 2 | 16 cm (6.3 in.) | 4 Ω | 20 W |
| *4 | Full Range | 2 | 16 cm (6.3 in.) | 4 Ω | 20 W |
Steering Pad Switch Assembly
| Item | Switch |
|---|---|
| Audio | ·
Volume +/- Switch ·
4 Way Switch ·
Back Switch ·
Enter Switch ·
MODE Switch |
| Telephone | ·
On Hook Switch ·
Off Hook Switch |
| *1 | 4 Way Switch | *2 | Enter Switch |
| *3 | Back Switch | *4 | Volume + Switch |
| *5 | Volume - Switch | *6 | MODE Switch |
| *7 | Off Hook Switch | *8 | On Hook Switch |
| *9 | Display Switch | - | - |