FUNCTION OF MAIN COMPONENTS
| Component | Function | |
|---|---|---|
| Inner Rear View Mirror Assembly | Display | Displays the images in rear of the vehicle from the rear television camera. |
| Display on/off Switch and LED indicator | ·
Pushing the Display on/off Switch while the rear monitor system is active will cause the display to disappear and illuminate an amber LED. ·
Pushing the Display on/off Switch again will cause the display to appear and illuminate a green LED. |
|
| Rear Television Camera Assembly | ·
Mounted on the back door to transmit the rear view of the vehicle to the inner rear view mirror assembly. ·
A color video camera that uses a Charge Coupled Device (CCD) and a wide-angle lens. |
|
| Park/Neutral Position Switch Assembly | Transmits a reverse shift position signal to the inner rear view mirror assembly. | |
OPERATING CONDITION
This system operates when both of the following conditions are met:
Ignition switch is ON.
Move the shift lever to R.
FUNCTION
Area Displayed on Screen
On the inner rear view mirror assembly, objects on the right of the vehicle appear on the right side of the display panel, and objects on the left of the vehicle appear on the left side of the display panel.
The television camera uses a wide-angle lens. The perceived distance from images that appear on the screen differs from the actual distance.
The area displayed on the screen may vary according to vehicle status or road conditions. The area covered by the television camera is limited. The television camera does not show objects close to either corner of the bumper or under the bumper.