Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TOYOTA PARKING ASSIST-SENSOR SYSTEM › from 2013.08
NM1440E _56 Audio / Visual / Telematics _056103 PARK ASSIST / MONITORING _0273725 TOYOTA PARKING ASSIST-SENSOR SYSTEM UN GENERAL/CONTROL/DETAILS F

PARK ASSIST / MONITORING  TOYOTA PARKING ASSIST-SENSOR SYSTEM  GENERAL/CONTROL/DETAILS  DETAILS  


FUNCTION OF MAIN COMPONENTS


a.

The components have the following functions:

Component Function
Ultrasonic Sensor Detects the distance between the vehicle and the obstacle.
Clearance Warning ECU Assembly Judges the approximate distance between the vehicle and obstacle based on the signals from the ultrasonic sensors and sends the buzzer signal to the clearance warning buzzer.
No. 1 Clearance Warning Buzzer Emits an intermittent sound to inform the driver that the clearance warning ECU assembly has detected an obstacle within the prescribed range.
Combination Meter Assembly Displays the location of the obstacle and the approximate distance between the vehicle and the obstacle.
Clearance Sonar Main Switch Turns the power of the intuitive parking assist system on/off.
Park/Neutral Position Switch Assembly Transmits the R position signal to the clearance warning ECU assembly.



OPERATING CONDITION


a.

The intuitive parking assist system operates when all the following conditions have been met:

i.

Ignition switch is ON.


ii.

Back sonar switch is on.


iii.

Move the shift lever to R.




CONSTRUCTION


a.

Ultrasonic Sensor

i.

This system uses 6 ultrasonic sensors: 2center ultrasonic sensors and 4 corner ultrasonic sensors. Each ultrasonic sensor consists of a sensor portion that transmits and receives ultrasonic waves and a pre-amplifier that amplifies them. Each ultrasonic sensor transmits ultrasonic waves, receives the reflected waves from an obstacle behind the vehicle, and transmits a signal to the clearance warning ECU assembly regarding the distance to the obstacle (approximately 1.5 m or less).

Y104045



b.

Clearance Warning Buzzer

i.

When the ultrasonic sensor transmits ultrasonic waves and receives the reflected waves from an obstacle, the buzzer sounds in stages according to the distance to the obstacle.

Y100456



c.

Combination Meter Assembly

i.

When the ultrasonic sensor transmits ultrasonic waves and receives the reflected waves from an obstacle, the indicator flashes in stages according to the distance to the obstacle.

Y138968E01
0.124,1.507 0.305,1.701 0.181,0.194 10 *a

Text in illustration
*a Although all areas with the sensors are marked in the illustrations, only the area with a malfunctioning sensor will be indicated by in an actuation vehicle. - -



d.

Clearance Warning ECU Assembly

i.

The clearance warning ECU assembly effects overall control of the system, including switching between transmission and reception of the ultrasonic sensor signals, processing the received wave signals, determining the presence of obstacles, actuating the clearance warning buzzer, and determining the presence of an open circuit in the sensors.




OPERATION


a.

After the intuitive parking assist system has started its activation, it sounds the clearance warning buzzer for about 1 second, while checking for any malfunction in the ultrasonic sensors.


b.

The on/off times of the clearance warning buzzer and combination meter assembly vary as shown in the table below, depending on the distance to the obstacle and the ultrasonic sensor that is detecting the obstacle.

Obstacle Distance [mm (in.)] Off Time (ms) On Time (ms)
Detection Area A B
Ultrasonic Sensor Center Corner
Detection Lever 1st Approx. 350 +/-50 (13.8 +/-1.97) or less Approx. 300 (11.8) or less 0 Continuous
2nd Approx. 350 +/-50 to 450 +/-50 (13.8 +/-1.97 to 17.7 +/-1.97) Approx. 300 (11.8) to 450 (17.7) 75 75
3rd Approx. 450 +/-50 to 600 +/-60 (17.7 +/-1.97 to 23.6 +/-2.36) Approx. 450 (17.7) to 600 (23.6) 150 150
4th Approx. 600 +/-60 to 1500 +/-150 (23.6 +/-2.36 to 59.1+/-5.91) - 650 150

Y138967E02
0.094,0.063 1.333,0.49 1.24,0.427 12 false Detection Area



DIAGNOSIS


a.

If the system cannot activate its detection function due to a malfunction in an ultrasonic sensor, it alerts the driver of the malfunction by the sounding the clearance warning buzzer. For details, refer to the Repair Manual.