Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM › 2009.08–2013.08
NM1440E _57 Power Source / Network _056104 NETWORKING _0273728 CAN COMMUNICATION SYSTEM UN GENERAL/CONTROL/DETAILS F

NETWORKING  CAN COMMUNICATION SYSTEM  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

The Controller Area Network (CAN) is a serial data communication network for real time application. It is a multiplex communication network to be equipped in a vehicle, and has communication speeds of 500 kbps (HS-CAN), and the ability to detect malfunctions.


b.

The CAN has two terminating resistors of 120 Ωwhich are necessary for accurate judgment of communication on the main bus.


c.

The terminating resistors for the V bus are located in the ECM and the combination meter.