Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE IMMOBILISER SYSTEM
NM1440E _58 Vehicle Interior _056106 THEFT DETERRENT / KEYLESS ENTRY _0273732 ENGINE IMMOBILISER SYSTEM UN GENERAL/CONTROL/DETAILS F

THEFT DETERRENT / KEYLESS ENTRY  ENGINE IMMOBILISER SYSTEM  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

The engine immobilizer system compares the ID code that is registered in the transponder key ECU with the ID code of the transponder chip that is embedded in the ignition key. The system unsets if these ID codes match. Thus, the transponder key ECU and the ECM communicate with each other to authorize fuel injection and ignition, enabling the engine to start.

HINT:

When replacing the transponder key ECU or making a new key, key recognition code(s) must be registered. For details, refer to the 4RUNNER Repair Manual (Pub. No. RM1440E).