OUTLINE
Combination Meter Assembly
Standard type and Optitron type combination meter assembly are used.
Multi-information Display, which displays the average fuel consumption, Eco Driving Indicator Zone Display, shift position indicator lamp and ODO/TRIP (Odometer/Trip meter), is adopted.
An Eco Driving Indicator Zone Display and Eco Driving Indicator Light are adopted to support environmentally friendly driving.
A volt gauge is used at the optitron meter to check the battery voltage.
| *A | Standard Type | *B | Optitron Type |
| *1 | Multi-information Display | *2 | Eco Driving Indicator Zone Display |
| *3 | Eco Driving Indicator Light | *4 | Volt Gauge |
(b) Multi-information Display
The multi-information display changes in the order shown below by pressing the ODO/TRIP switch.
Accessory Meter Assembly
The accessory meter displays the cruise information (Average Fuel Consumption, Average Vehicle Speed, Drivable Distance Display, Outside Temperature, Clock and, Direction Finder).
A Liquid Crystal Display (LCD) type accessory meter assembly is used.