Home › Vehicle Interior › SEAT › POWER SEAT CONTROL SYSTEM › from 2013.08
NM1440E _58 Vehicle Interior _056110 SEAT _0273737 POWER SEAT CONTROL SYSTEM UN GENERAL/CONTROL/DETAILS F

SEAT  POWER SEAT CONTROL SYSTEM  GENERAL/CONTROL/DETAILS  DETAILS  


FUNCTION OF MAIN COMPONENTS


a.

Front Power Seat

Component Function
Front Power Seat Switch Operates the front power seat.
Lumbar Support Switch*1 Operates the lumbar support.
Seat Memory Switch*2 Operate the driving position memory function.
Position Control ECU*2
·

Operates the motors in accordance with the signals from the front power seat switch.

·

Registers and recalls seat positions in accordance with the operation of the seat memory switch.


Main Body ECU*2 Various signals are transmitted and received via the Controller Area Network (CAN) by way of the main body ECU.

*1: For driver side

*2: Models with memory function




OPERATING CONDITION


a.

Memory Function

i.

The operating conditions of the memory function are as follows:

Function Condition Operation
Memory Either of the following conditions is met while the ignition switch is ON:
·

Button 1 or 2 is pushed while the "SET" button is pushed.

·

Button 1 or 2 is pushed within 3 seconds after the "SET" button is pushed.


·

Stores the seat position.

·

When the memory setting is completed, the buzzer will sound for 0.5 seconds.


Recall
·

Ignition switch is ON.

·

Shift lever is in P.

·

Button 1 or 2 is pushed.


Recalls the seat position that was memorized in the position control ECU.
Button 1 or 2 is pushed within 180 seconds after:
·

Ignition switch is off.

·

Driver door is opened.


Button 1 or 2 is pushed within 60 seconds after:
·

Ignition switch is off.

·

Driver door is closed.






FUNCTION


a.

Front Power Seat

i.

The front power seat system controls the driver seat using by the front power seat switch.


ii.

The lumbar support function, which offers extra support over a substantial area of the lower back, is used.*1


iii.

The memory function controls the driver seat.*2


iv.

Each function of the front power seat operates as follows:

Function Outline
Manual Control The user can perform slide, reclining, front vertical*1, seat lifter*1 and lumbar support*1 adjustments by operating the front power seat switch and lumbar support switch.
Memory*1, *2 Memory The memory function can memorize 2 different seat positions.
Recall The recall function can recall 2 different memorized seat positions.

*1: For driver side

*2: Models with memory function