Home › Engine / Hybrid System › 1GR-FE ENGINE CONTROL › THROTTLE BODY
RM1440E _51 Engine / Hybrid System _056124 1GR-FE ENGINE CONTROL _0273863 THROTTLE BODY G

1GR-FE ENGINE CONTROL  THROTTLE BODY  INSPECTION  


PROCEDURE

Hide 22030 1.INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY

a.
A223680E01
2.166,1.557 2.412,1.748 0.246,0.191 10 M+ 2.606,1.552 2.852,1.743 0.246,0.191 10 M- 2.272,1.54 2.272,1.127 false 2.671,1.54 2.671,1.128 false 0.086,0.005 0.332,0.195 0.246,0.191 10 *a

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*a Component without harness connected
(Throttle Body with Motor)

Standard Resistance:
Tester Connection Condition Specified Condition
2 (M+) - 1 (M-) 20°C (68°F) 0.3 to 100 Ω


If the result is not as specified, replace the throttle body with motor assembly.