Home › Engine / Hybrid System › 1GR-FE ENGINE MECHANICAL › DRIVE BELT
RM1440E _51 Engine / Hybrid System _056125 1GR-FE ENGINE MECHANICAL _0273878 DRIVE BELT A

1GR-FE ENGINE MECHANICAL  DRIVE BELT  REMOVAL  


PROCEDURE

Hide 16361A 1.REMOVE FAN AND GENERATOR V BELT

a.
A217571

While turning the belt tensioner counterclockwise, align the service hole for the belt tensioner and the belt tensioner fixing position, and then insert a bar of φ 6 mm (0.236 in.) into the service hole to fix the belt tensioner in place.

HINT:

The pulley bolt for the belt tensioner has a left-hand thread.



b.

Remove the V belt.