Home › Engine / Hybrid System › 1GR-FE ENGINE MECHANICAL › CYLINDER HEAD
RM1440E _51 Engine / Hybrid System _056125 1GR-FE ENGINE MECHANICAL _0273885 CYLINDER HEAD A

1GR-FE ENGINE MECHANICAL  CYLINDER HEAD  DISASSEMBLY  


PROCEDURE

Hide 13711 1.REMOVE INTAKE VALVE

a.
A221102E02
1.865,0.229 1.75,0.229 1.75,0.229 1.469,0.531 true 1.927,0.156 2.271,0.344 0.344,0.188 10 false SST

Using SST, compress the inner compression spring and remove the valve spring retainer locks.

SST
09202-70020  (09202-00010)


b.

Remove the valve spring retainer, inner compression spring and intake valve.

HINT:

Arrange the removed parts in the correct order.



Hide 13715 2.REMOVE EXHAUST VALVE

a.
A221103E01
1.635,0.09 1.947,0.272 0.312,0.182 10 SST 2.017,0.173 2.163,0.173 2.163,0.173 2.386,0.463 false

Using SST, compress the inner compression spring and remove the valve spring retainer locks.

SST
09202-70020  (09202-00010)


b.

Remove the valve spring retainer, inner compression spring and exhaust valve.

HINT:

Arrange the removed parts in the correct order.



Hide 13711E 3.REMOVE VALVE STEM OIL SEAL

a.
A221104

Using needle-nose pliers, remove the valve stem oil seals.


Hide 13734 4.REMOVE VALVE SPRING SEAT

a.
A221105

Using compressed air and a magnet hand, remove the valve spring seats by blowing air onto them.


Hide 11117E 5.REMOVE NO. 1 STRAIGHT SCREW PLUG

a.
A221106E05
0.052,0.073 0.24,0.25 0.188,0.177 10 false *A 0.052,2.365 0.24,2.542 0.188,0.177 10 false *B

Using a 10 mm hexagon wrench, remove the 4 No. 1 straight screw plugs and 4 gaskets.

Text in Illustration
*A RH
*B LH

NOTICE:

If coolant leaks from a straight screw plug or a plug is corroded, replace it.



Hide 11117F 6.REMOVE NO. 2 STRAIGHT SCREW PLUG

a.
A221107E05
0.073,0.063 0.292,0.25 0.219,0.188 10 false *A 0.073,2.542 0.292,2.729 0.219,0.188 10 false *B

Using a 14 mm hexagon wrench, remove the 2 No. 2 straight screw plugs and 2 gaskets.

Text in Illustration
*A RH
*B LH

NOTICE:

If coolant leaks from a straight screw plug or a plug is corroded, replace it.



Hide 7.REMOVE STUD BOLT

NOTICE:

If a stud bolt is deformed or its threads are damaged, replace it.