Home › Engine / Hybrid System › 1GR-FE FUEL › FUEL PUMP
RM1440E _51 Engine / Hybrid System _056126 1GR-FE FUEL _0273892 FUEL PUMP A

1GR-FE FUEL  FUEL PUMP  REASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:

Do not disconnect the hoses indicated in the illustration.


A223122

PROCEDURE

Hide 23070 1.INSTALL FUEL MAIN VALVE ASSEMBLY

a.
A223172E01
0.294,0.193 0.481,0.338 0.187,0.145 10 *1 0.504,0.284 1.8,0.284 1.8,0.284 1.8,0.641 false 0.713,0.981 0.713,0.284 false

Apply a light coat of gasoline to 2 new O-rings and install the O-rings to the fuel main valve.

Text in Illustration
*1 New O-Ring


b.

Install the fuel main valve to the fuel filter case.

NOTICE:

Make sure the O-rings are not cut or pinched during installation.



Hide 23221 2.INSTALL FUEL PUMP

a.

Connect the fuel pump wire harness connector to the fuel pump.


b.
A223260E03
2.24,0.938 2.844,0.938 false 2.26,0.74 2.74,0.5 2.74,0.5 2.844,0.5 false 2.896,0.854 3.094,1 0.198,0.146 10 false *2 2.896,0.427 3.094,0.573 0.198,0.146 10 false *1

Apply a light coat of gasoline to a new O-ring. Then install the fuel pump spacer and O-ring to the fuel pump.

Text in Illustration
*1 New O-Ring
*2 Fuel Pump Spacer


c.
A223259E01
0.261,0.572 0.444,0.723 0.183,0.151 10 *1 1.069,0.659 0.469,0.659 false

Attach the 5 claws to the claw holes to install the fuel pump to the fuel filter case.

Text in Illustration
*1 Fuel Filter Case


Hide 77131C 3.INSTALL NO. 1 FUEL SUB-TANK

a.
A223171

Attach the 3 claws to the claw holes to install the No. 1 fuel sub-tank.


b.
A223170

Attach the 3 claws to the claw holes.


c.

Install the tube part to the No. 1 fuel sub-tank.

i.
A223268E05
0.417,1.563 0.521,1.563 0.521,1.563 1.083,2.01 true 0.229,1.469 0.417,1.615 0.188,0.146 10 false *1

Attach the claw on the end of the tube to the claw hole. Install the tube to the 2 clamps on the No. 1 fuel sub-tank.



d.

Connect the jet pump to the No. 1 fuel sub-tank.

Text in Illustration
*1 Jet Pump


e.

Connect the fuel pump connector.