Home › Engine / Hybrid System › 1GR-FE FUEL › FUEL PUMP ECU › from 2014.08
RM1440E _51 Engine / Hybrid System _056126 1GR-FE FUEL _0273893 FUEL PUMP ECU A

1GR-FE FUEL  FUEL PUMP ECU  REMOVAL  


PROCEDURE

Hide 89570A 1.REMOVE FUEL PUMP CONTROL ECU ASSEMBLY (w/o Secondary Air Injection System)

a.
A225437

Disconnect the 2 connectors.


b.

Remove the 2 bolts and fuel pump control ECU assembly.

NOTICE:

Make sure the fuel pump control ECU assembly is not subjected to physical shocks, such as being dropped, etc.



Hide 2.REMOVE FUEL PUMP CONTROL ECU WITH BRACKET (w/ Secondary Air Injection System)

a.
A288457E03
1.083,1.823 1.219,1.969 true 1.083,2.188 1.417,2.698 true 2.458,0.906 2.75,0.729 false 0.927,1.698 1.156,1.885 0.229,0.188 10 false *3 1.406,2.719 1.635,2.906 0.229,0.188 10 false *1 2.792,0.615 3.021,0.802 0.229,0.188 10 false *2

Using a screwdriver, disengage the claw in the connector as shown in the illustration.

HINT:

Tape the screwdriver tip before use.


Text in Illustration
*1 Claw
*2 Lever
*3 Protective Tape


b.

Turn the lever as shown in the illustration and disconnect the connector.


c.

Remove the 2 bolts and fuel pump control ECU with bracket.

NOTICE:

Make sure the fuel pump control ECU is not subjected to physical shocks, such as being dropped, etc.



Hide 89571 3.REMOVE FUEL PUMP CONTROL ECU (w/ Secondary Air Injection System)

a.
A289616

Remove the 4 screws, fuel pump control ECU and ECU bracket from the fuel pump control ECU bracket.