Home › Engine / Hybrid System › 1GR-FE FUEL › FUEL SENDER GAUGE ASSEMBLY
RM1440E _51 Engine / Hybrid System _056126 1GR-FE FUEL _0273895 FUEL SENDER GAUGE ASSEMBLY G

1GR-FE FUEL  FUEL SENDER GAUGE ASSEMBLY  INSPECTION  


PROCEDURE

Hide 83320 1.INSPECT FUEL SENDER GAUGE ASSEMBLY

a.
A223150E01
0.579,2.522 0.716,2.669 0.137,0.147 10 F 1.854,2.607 0.743,2.607 false 0.579,4.33 0.716,4.477 0.137,0.147 10 E 1.699,4.415 0.743,4.415 false

Check that the float moves smoothly between F and E.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 3 Float position is F (upper) 12 to 18 Ω
Float position is E (lower) 405 to 415 Ω


If the result is not as specified, replace the fuel sender gauge assembly.