Home › Engine / Hybrid System › 1GR-FE EMISSION CONTROL › PCV VALVE
RM1440E _51 Engine / Hybrid System _056127 1GR-FE EMISSION CONTROL _0273900 PCV VALVE G

1GR-FE EMISSION CONTROL  PCV VALVE  INSPECTION  


PROCEDURE

Hide 12204 1.INSPECT PCV VALVE SUB-ASSEMBLY

a.

Install a clean hose to the PCV valve.


b.

Check the PCV valve operation.

i.
A225484E01
2.989,1.482 3.173,1.645 0.184,0.163 10 *2 1.202,1.59 1.385,1.753 0.184,0.163 10 *1 1.408,1.676 1.537,1.676 1.537,1.676 1.765,1.369 false 2.946,1.581 2.83,1.581 2.83,1.581 2.706,1.765 false

Blow air into the cylinder head side, and check that air passes through easily.

Text in Illustration
*1 Hose
*2 Air

CAUTION:

Do not suck air through the valve.

Petroleum substances inside the valve are hazardous to your health.



ii.
A225485E03
1.271,1.594 1.375,1.594 1.375,1.594 1.583,1.167 false 1.25,0.219 1.094,0.219 1.094,0.219 0.896,0.594 false 1.063,1.51 1.25,1.677 0.188,0.167 10 false *1 1.271,0.146 1.458,0.313 0.188,0.167 10 false *2

Blow air into the intake manifold side, and check that air passes through with difficulty.

Text in Illustration
*1 Hose
*2 Air

If the result is not as specified, replace the PCV valve.



c.

Remove the clean hose from the PCV valve.