Home › Engine / Hybrid System › 1GR-FE LUBRICATION › OIL PUMP
RM1440E _51 Engine / Hybrid System _056130 1GR-FE LUBRICATION _0273918 OIL PUMP A

1GR-FE LUBRICATION  OIL PUMP  REASSEMBLY  


PROCEDURE

Hide 15131 1.INSTALL OIL PUMP RELIEF VALVE

a.

Coat the relief valve with engine oil and insert the relief valve and spring into the valve hole.


b.
A223652

Install the relief valve plug.

Torque:
49 N*m (500 kgf*cm, 36 ft.*lbf)


Hide 15115 2.INSTALL OIL PUMP COVER

a.

Apply fresh engine oil to the drive and driven rotors.


b.
A223654E08
1.5,1.198 0.438,1.198 true 1.469,0.51 0.698,1.198 true 0.26,1.115 0.479,1.313 0.219,0.198 10 false *a

Place the drive and driven rotors into the timing chain cover with the marks facing the oil pump cover side.

Text in Illustration
*a Mark


c.
A225445

Install the oil pump cover with the 8 bolts and screw.

Torque:
for screw : 10 N*m (102 kgf*cm, 7 ft.*lbf)
for bolt : 9.0 N*m (92 kgf*cm, 80 in.*lbf)

Text in Illustration
V100135

Bolt
V100136

Screw