Home › Engine / Hybrid System › 1GR-FE STARTING › IGNITION SWITCH
RM1440E _51 Engine / Hybrid System _056131 1GR-FE STARTING _0273922 IGNITION SWITCH A

1GR-FE STARTING  IGNITION SWITCH  INSTALLATION  


PROCEDURE

Hide 84450 1.INSTALL IGNITION SWITCH ASSEMBLY

a.

Attach the claw to connect the key interlock solenoid wire harness to the ignition switch.


b.

Install the ignition switch with the 2 screws.


c.

Connect the ignition switch connector, key interlock solenoid connector and wire harness clamp.


Hide 45287 2.INSTALL LOWER STEERING COLUMN COVER

a.

Attach the 2 claws to install the lower steering column cover.


b.

Install the 2 screws.

HINT:

Turn the steering wheel to the right and left as necessary to install the 2 screws.