Home › Engine / Hybrid System › 1GR-FE STARTING › IGNITION SWITCH
RM1440E _51 Engine / Hybrid System _056131 1GR-FE STARTING _0273922 IGNITION SWITCH A

1GR-FE STARTING  IGNITION SWITCH  REMOVAL  


PROCEDURE

Hide 45287 1.REMOVE LOWER STEERING COLUMN COVER

a.
A225246

Remove the 2 screws.

HINT:

Turn the steering wheel to the right and left as necessary to remove the 2 screws.



b.

Detach the 2 claws to remove the lower steering column cover.


Hide 84450 2.REMOVE IGNITION SWITCH ASSEMBLY

a.
A222874

Disconnect the ignition switch connector, key interlock solenoid connector and wire harness clamp.


b.

Remove the 2 screws and ignition switch.


c.

Detach the claw and disconnect the key interlock solenoid wire harness from the ignition switch.