Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL MAIN SWITCH
RM1440E _51 Engine / Hybrid System _056132 CRUISE CONTROL _0273924 CRUISE CONTROL MAIN SWITCH G

CRUISE CONTROL  CRUISE CONTROL MAIN SWITCH  INSPECTION  


PROCEDURE

Hide 84632 1.INSPECT CRUISE CONTROL MAIN SWITCH

a.

Remove the cruise control main switch.

B215369E03
0.497,2.805 0.807,2.986 0.310,0.181 10 CCS 1.384,2.78 1.694,2.961 0.310,0.181 10 ECC 2.573,2.725 2.976,2.907 0.403,0.181 10 (CCS) 2.573,2.046 2.976,2.227 0.403,0.181 10 (ECC) 0.934,2.401 0.665,2.777 false 1.314,2.401 1.53,2.746 false 3.866,2.385 4.230,2.567 0.364,0.181 10 MAIN 4.528,2.385 4.911,2.567 0.384,0.181 10 +RES 5.289,2.385 5.622,2.567 0.333,0.181 10 -SET 6,2.385 6.581,2.567 0.580,0.181 10 CANCEL

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 (ECC) - 3 (CCS) Neutral 1 MΩ or higher
1 (ECC) - 3 (CCS) +RES 235 to 245 Ω
1 (ECC) - 3 (CCS) -SET 617 to 643 Ω
1 (ECC) - 3 (CCS) CANCEL 1509 to 1571 Ω
1 (ECC) - 3 (CCS) Main switch off 1 MΩ or higher
1 (ECC) - 3 (CCS) Main switch on Below 2.5 Ω


If the result is not as specified, replace the cruise control main switch.