Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › PROPELLER SHAFT ASSEMBLY(for 2WD)
RM1440E _52 Drivetrain _056136 DRIVE SHAFT / PROPELLER SHAFT _0273963 PROPELLER SHAFT ASSEMBLY(for 2WD) A

DRIVE SHAFT / PROPELLER SHAFT  PROPELLER SHAFT ASSEMBLY(for 2WD)  INSTALLATION  


PROCEDURE

Hide 37110 1.INSTALL PROPELLER SHAFT ASSEMBLY

a.

Remove the SST from the extension housing.

SST
09325-40010  


b.

Install the propeller shaft assembly in the extension housing.


c.

Align the matchmarks on the propeller shaft flange and differential flange.


d.

Install the propeller shaft assembly with the 4 nuts and 4 washers.

Torque:
88 N*m (897 kgf*cm, 65 ft.*lbf)