Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › PROPELLER SHAFT ASSEMBLY(for 4WD)
RM1440E _52 Drivetrain _056136 DRIVE SHAFT / PROPELLER SHAFT _0273964 PROPELLER SHAFT ASSEMBLY(for 4WD) A

DRIVE SHAFT / PROPELLER SHAFT  PROPELLER SHAFT ASSEMBLY(for 4WD)  INSTALLATION  


PROCEDURE

Hide 37110 1.INSTALL PROPELLER SHAFT ASSEMBLY

a.

Align the matchmarks on the propeller shaft flange and differential flange.


b.

Install the propeller shaft assembly with the 4 bolts, 4 nuts and 4 washers.

Torque:
88 N*m (897 kgf*cm, 65 ft.*lbf)


c.

Align the matchmarks on the propeller shaft flange and transfer flange.


d.

Install the propeller shaft assembly with the 4 nuts and 4 washers.

Torque:
88 N*m (897 kgf*cm, 65 ft.*lbf)