Home › Drivetrain › AXLE AND DIFFERENTIAL › FRONT AXLE HUB(for 4WD)
RM1440E _52 Drivetrain _056137 AXLE AND DIFFERENTIAL _0273968 FRONT AXLE HUB(for 4WD) A

AXLE AND DIFFERENTIAL  FRONT AXLE HUB(for 4WD)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE FRONT WHEEL

Hide 47750 2.REMOVE DISC BRAKE CYLINDER ASSEMBLY LH

Hide 43512 3.REMOVE FRONT DISC

Hide 43514C 4.REMOVE FRONT AXLE HUB GREASE CAP

a.

Using a screwdriver and hammer, remove the front axle hub grease cap.

NOTICE:

Do not damage the axle hub.



Hide 43502H 5.REMOVE FRONT AXLE SHAFT NUT

a.
F042732

Remove the cotter pin and lock cap.


b.

Remove the front axle shaft nut.


Hide 43502C 6.REMOVE FRONT AXLE HUB SUB-ASSEMBLY LH

F042759

a.

Remove the 4 bolts.


b.

Using a plastic-faced hammer, tap out the front drive shaft from the front axle hub.

NOTICE:

Be careful not to damage the drive shaft boot.



c.

Remove the front axle hub and front disc dust cover.


d.

Remove the O-ring.