Home › Drivetrain › AXLE AND DIFFERENTIAL › REAR AXLE SHAFT
RM1440E _52 Drivetrain _056137 AXLE AND DIFFERENTIAL _0273972 REAR AXLE SHAFT A

AXLE AND DIFFERENTIAL  REAR AXLE SHAFT  REASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:

Do not allow foreign matter, etc. to contact the rear axle hub and bearing assembly.


PROCEDURE

Hide 42441B 1.INSTALL BRAKE DRUM OIL DEFLECTOR LH

G020977E08
1.313,0.781 0.625,1.125 false 1.313,1.333 0.625,1.125 false 0.375,1.042 0.594,1.219 0.219,0.177 10 false *1

a.

Install a new deflector gasket and deflector to the rear axle shaft.

HINT:

Align the 2 oil drain holes.


Text in Illustration
*1 Oil Drain Holes


b.

Insert 6 new hub bolts.


c.
G020973

Temporarily install a washer and nut to each hub bolt as shown in the illustration.


d.

Install the hub bolts by tightening each nut.


e.

Remove the washer and nut from each hub bolt.


Hide 42450B 2.INSTALL REAR AXLE HUB AND BEARING ASSEMBLY LH

a.

Install a new rear axle hub and bearing to the parking brake plate.

NOTICE:

Make sure the bearing is securely installed to the parking brake plate.



b.
F042777

Using 2 socket wrenches and a press, press in the 4 housing bolts.


Hide 42312 3.INSTALL REAR AXLE SHAFT LH

C361747E01
1.208,0.844 1.76,0.844 false 0.333,1.635 0.448,1.167 false 2.417,1.844 2.823,3.031 false 2.323,2.625 2.823,3.042 false 2.281,2.813 2.823,3.042 false 1.813,0.771 2.125,0.969 0.313,0.198 10 false *a 0.24,1.656 0.552,1.854 0.313,0.198 10 false *b 2.708,3.063 3.083,3.26 0.375,0.198 10 true SST

a.

Install a new washer and a new retainer to the axle hub as shown in the illustration.

Text in Illustration
*a Tapered Surface
*b Chamfered Surface

NOTICE:
·

Install the washer with its tapered surface facing downward.

·

Install the retainer with its chamfered surface facing downward.




b.

Using SST and a press, press in the rear axle shaft.

SST
09631-12090  
09726-40010  
09951-01100  

NOTICE:

Make sure the bearing is securely installed to the rear axle shaft.



Hide 42312D 4.INSTALL REAR AXLE SHAFT SNAP RING LH

F042773

a.

Using snap ring expander, install a new rear axle shaft snap ring.